Fiber Lasers Continue to Gain Market Share in Material Processing Applications February 1, 2016 The first kilowatt-class fiber laser for material processing was introduced by IPG Photonics in early 2002. Since that time, the adoption of fiber lasers for production applications has grown at a rapid rate. Today, fiber lasers are becoming the choice for most major production laser applications as well as converting traditional welding and cutting processes to fiber laser technologies.
3D-Printed Parts Restore Cars’ Glory August 12, 2016 Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
3D Laser Gaging Ensures Flawless Engine Fasteners January 6, 2017 In an automobile engine, seven types of screws out of approximately 70 are considered critical to achieving the engine’s specified design performance, despite high vibration and heat. The seven include bolts for the cylinder head, crankshaft, con rod, flywheel, and main bearing cap, as well as for the camshaft cap, camshaft sprocket and VCT.
Welding Automation Addresses Skills Shortage October 5, 2020 Like just about every other manufacturing operation, welding has made the leap into the 21st century with automation, agile manufacturing processes, and offline programming.
Laser Welding for Sheetmetal Fabricators April 18, 2017 Although laser welding is a well-established manufacturing solution, many sheetmetal fabricators have been hesitant to implement the process at their shop.
Lasers and Robots: Marriage of Convenience March 1, 2017 As both robots and lasers improve their capabilities, they prove to be even better partners in more applications
Manufacturing with Momentum November 13, 2019 It doesn’t take long to see the changing face of manufacturing staples in Volusia County. Strategically located in the thriving central Florida marketplace east of Orlando along the I-4/I-95 highways, Volusia County has always been a good geographic location for manufacturers.
FABTECH Returns to McCormick Place in Chicago September 13-16, 2021 November 13, 2020 While FABTECH 2020 was cancelled due to the COVID-19 pandemic, plans are underway to bring FABTECH 2021 to Chicago in 2021. That means North America’s largest metal forming, fabricating, welding and finishing event will be heading to McCormick Place Sept. 13-16, 2021.
Switch to Metal-Cored Wire Improves Efficiency, Quality for Chain Manufacturer January 10, 2020 As part of its continued drive for improvement and innovation, Webster Industries recently converted from solid wire to metal-cored wire in its robotic, fixed automation and semi-automatic welding operations.
Buck Rogers Blasts into the Toolroom June 21, 2017 In addition to carbide, ceramics, and cermet, the drive to create the hardest possible cutting tool materials has given us the alphabet soup of PCD, PCBN, CVD-D, and MCD (polycrystalline diamond, polycrystalline cubic boron nitride, chemical vapor deposition diamond, and mono-crystalline diamond, respectively).