Optical Metrology in Three Dimensions May 29, 2018 Basic trends in modern manufacturing are driving growth in 3D optical metrology. “One is the highly complex and high-tech material that manufacturers are using today. For example, in the aerospace turbine blade market, they simply cannot touch the part like they used to—the surface finish of the material is too readily affected by any kind of contact metrology."
Hot Techniques for Cutting High-Temperature Alloys August 1, 2018 For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
From Multispot Welding to Limiting Soot: Tips for Optimal Laser Joins September 28, 2018 In our May webinar titled “Lasers in Manufacturing: State of the Art in 2018,” we noted the emergence of some novel technologies to produce the “holy grail” of laser welding: spatter-free joins with no porosity and, when required, highly aesthetic outcomes.
Medical Machining Shifts Into High Gear—With a Laser Assist July 5, 2018 Constant refinement of medical machining from tooling design to finished product requires not only the ability to handle a broad range of plastic and metal materials but also to achieve predictable results—particularly in the face of strict regulations.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
Change-up Pitch: From Metal to Plastic October 2, 2014 Even though it’s been around since the 1950s, when engineering-grade resins were first introduced, many manufacturers still are not familiar with the many benefits that metal-to-plastic conversion provides.
Lean at NUMMI September 1, 2005 To remain competitive in the fiercely contested North American automotive industry, the New United Motor Manufacturing Inc. (NUMMI, Fremont, CA) assembly plant, a joint venture between Toyota Motor Corp. (Aichi Prefecture, Japan) and General Motors Corp. (Detroit), has rededicated its efforts in lean manufacturing during the past few years by applying key tenets of the Toyota Production System (TPS).
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
CoroPlus Brings Connectivity to Manufacturing September 20, 2016 Cutting tool and tooling systems specialist Sandvik Coromant has unveiled its CoroPlus suite of Industrial Internet of Things (IIoT) solutions aimed at helping manufacturers prepare for Industry 4.0. The concept is designed specifically to improve the control of productivity and costs through a combination of machine connectivity and CoroPlus – the suite of connectivity solutions from Sandvik Coromant – helps manufacturers prepare for Industry 4.0 access to manufacturing data and expert knowledge.