The Wide World of Deburring and Refinishing October 5, 2016 Burrs, sharp edges, and rough surfaces plague even the most precise metal-cutting or forming process. Deburring and finishing can often be treated as the step-child of a manufacturing process, but its importance is growing as tolerances get tighter and precision devices become the norm.
EDM Expands into New Territories October 5, 2016 The use of electrical discharge machining, or EDM, is spreading as manufacturers need more precisely cut workpieces, often made from tough to machine materials.
High-Speed Cutting for Small Precision Parts October 5, 2016 Dau Thermal Solutions Inc. (Macedon, NY) was finding that its spindle speeder was definitely not up to speed when it came up against the test results for NSK’s HES510 series electric spindle.
Basic VMC Platform is a Proven Workhorse June 20, 2016 VMCs have had a productive past, present and the future looks promising
Quality Inspection and the CAD Connection January 6, 2016 Modern manufacturing is rapidly adopting model-based definition (MBD). When employing an MBD strategy, the CAD model becomes more than the nominal to which all parts are measured and inspected against. MBD keeps the all-important digital thread intact—from design to manufacturing to inspection and quality reporting.
Metrology Tools for In-Process Inspection October 12, 2017 While suppliers are under more pressure than ever to produce precision parts faster and with less scrap, in-process metrology means manufacturers can detect as soon as possible when a part is going wrong, correcting the issue quickly and saving it from scrap.
Mitutoyo America Opens New Facility in Detroit Area June 30, 2017 Mitutoyo America Corp. (MAC; Aurora, IL) celebrated the grand opening of its new Detroit-area M3 Solution Center in Novi, MI, on June 28. The 8455 ft2 (785.5 m2) facility replaces one that the company had occupied for 38 years in nearby Plymouth, MI.
Electropolishing Automation April 1, 2012 Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.
The Ins and Outs of In-Line Automated Inspection July 1, 2012 The challenges to manufacturing as it evolves into the 21st century are now familiar, and impact how metrology must contribute. Manufacturers face uncertain production volumes with roller-coaster demand, shorter production runs and faster product development cycles. Automation, while alluring as a way to reduce cost, needs to adjust.
Measure It On The Machine January 1, 2013 Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.
