Displaying 81-90 of 597 results for

Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.

Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.

The challenges to manufacturing as it evolves into the 21st century are now familiar, and impact how metrology must contribute. Manufacturers face uncertain production volumes with roller-coaster demand, shorter production runs and faster product development cycles. Automation, while alluring as a way to reduce cost, needs to adjust.

Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.

When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.

It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.

Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.

April is National Welding Month and exciting things are happening within the industry. In this podcast, Chris Mahar, Associate Editor of Manufacturing Engineering magazine, talks with Monica Pfarr, Executive Director of the American Welding Society Foundation about what’s happening in the industry and what AWS is doing to celebrate. From the industry as a whole to the current market temperature and the workforce, this podcast is a welding one-stop-shop.

Mark Kirby, Registered Professional Engineer and Additive Manufacturing Business Manager for Renishaw Canada and Bruce Morey, Senior Technical Editor for Manufacturing Engineering Magazine discuss the pluses and minuses of the still-emerging 3D printing technology that is sweeping the business press. We will take a look at common misconceptions and what, in our opinion, could be things to watch out for if any of our listeners are thinking about adopting 3D printing for their applications.

Kevin Smith, senior commercial application engineer at Markforged, explains how the Markforged Metal X 3D printing process works, for starters. He also gets into how FFF metal printing differs from DMLS and other processes. And he goes over materials that can be printed on the Metal X, as well as the applications that are best suited for metal 3D printing.