Geometry Lesson Teaches Corvette How to Lighten Up October 14, 2016 It’s been almost two decades since the C5 Corvette hit the streets with its groundbreaking chassis built around hydroformed steel bumper-to-bumper frame rails. The technology gave engineers a chance to create components that were both lighter and stiffer than traditional stamped and welded assemblies.
Extrusion and Drawing Knowledge January 2, 2015 Extrusion and drawing, two related, stalwart topics in material forming, are covered from top of punch to bottom of die in more than 200 papers in the SME Technical Paper library. The range of contributors is broad, from companies like Alcoa, Westinghouse, ASEA, Western Electric and General Electric to universities in Japan, Germany and the US, as well as individual entrepreneur metalworking shops.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Testing the Metal November 27, 2018 Materials science has opened new possibilities for designers of cars, planes and other products. Metal alloys are now as precisely engineered as they are machined. The result is longer lasting, stronger parts. But with a wider selection of materials comes risk—how can you be sure that one piece of gray metal stock is different than another? Careful warehousing procedures and paperwork only go so far.
Process Control by Analyzing Metal Temperature Gradients with Fixed Thermal Imaging November 22, 2019 Producing metal products is one of the most energy intensive industries. Improving both energy and production efficiency, as well as ensuring product quality is at the top of any manufacturers to do list. Engineers should consider using fixed thermal imaging cameras to optimize their manufacturing process.
Ovako Launches Enhanced Digital Steel Navigator January 3, 2020 Ovako, a producer of clean steel, has made several enhancements to its online Steel Navigator. This digital tool is designed to help customers search for specific steel grades by group, quality, type of process, product and chemical composition.
3D-Printed Parts Restore Cars’ Glory August 12, 2016 Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
Pilot Composites Workshop Wows Students February 7, 2017 Carbon fiber is a magical material. That or similar comments were heard over and over from Roosevelt High School (Seattle) students attending a Composites 101 Workshop held at the National Resource Center for Materials Technology Education (MatEdU), a National Science Foundation Advanced Technological Education (ATE)-sponsored program at Edmonds Community College (Lynnwood, WA).