The High-Speed Machining Benefits of Brass July 12, 2018 US machine shops are potentially underutilizing the machinability of brass by as much as 85 percent in their part processing operations, reports a recent study from the Copper Development Association Inc. (McLean, VA).
Extrusion and Drawing Knowledge January 2, 2015 Extrusion and drawing, two related, stalwart topics in material forming, are covered from top of punch to bottom of die in more than 200 papers in the SME Technical Paper library. The range of contributors is broad, from companies like Alcoa, Westinghouse, ASEA, Western Electric and General Electric to universities in Japan, Germany and the US, as well as individual entrepreneur metalworking shops.
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Testing the Metal November 27, 2018 Materials science has opened new possibilities for designers of cars, planes and other products. Metal alloys are now as precisely engineered as they are machined. The result is longer lasting, stronger parts. But with a wider selection of materials comes risk—how can you be sure that one piece of gray metal stock is different than another? Careful warehousing procedures and paperwork only go so far.
Searching for the Perfect Lightweighting Recipe September 1, 2016 Lightweighting is so established it’s now part of marketing for new vehicles. Automakers routinely detail how much less models weigh than their predecessors. General Motors Co., for example, has said a range of its vehicles is anywhere from almost 250 lb (112.5 kg) to 700 lb (315 kg) lighter.
Honeycomb Heroes: Making Composites for Aerospace June 24, 2016 There’s an old saw that if bumblebees were aeronautical engineers they would know they can’t fly. Quite apart from the miracle of their flight, bees also happen to make a lightweight structure of surprising strength, just the sort of thing you’d want if you were building aircraft: honeycomb.
3D-Printed Parts Restore Cars’ Glory August 12, 2016 Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
Pilot Composites Workshop Wows Students February 7, 2017 Carbon fiber is a magical material. That or similar comments were heard over and over from Roosevelt High School (Seattle) students attending a Composites 101 Workshop held at the National Resource Center for Materials Technology Education (MatEdU), a National Science Foundation Advanced Technological Education (ATE)-sponsored program at Edmonds Community College (Lynnwood, WA).