New Technology in CNC Automatic Lathes Drives Higher Productivity May 1, 2014 A fully programmable B axis is the latest advanced technology for Swiss machines.
Faucet Parts Gush from Multistation Center November 1, 2013 A manufacturing engineer’s open mind, common sense and eclectic background in business have transformed the way parts are machined at the Guadalajara, Mexico, plant of plumbing fixture leader URREA Group.
Dunnage: Often Ignored, Always Important October 1, 2012 Dunnage used to ship and process automotive parts on the shop floor is a key component in the overall manufacturing process, yet it is often overlooked when companies are working to make lines lean and green. Today, it is important that manufacturers know that most dunnage used to transport parts from start to finish can be reused for the lifetime of production.
Drilling Difficult Materials January 1, 2012 Drilling a hole to required specification in production drilling can be challenging when the workpiece material is especially difficult-to-machine.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Maybe it’s Time to Try Some ‘Swiss Cheese’ November 1, 2016 These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Geometry Lesson Teaches Corvette How to Lighten Up October 14, 2016 It’s been almost two decades since the C5 Corvette hit the streets with its groundbreaking chassis built around hydroformed steel bumper-to-bumper frame rails. The technology gave engineers a chance to create components that were both lighter and stiffer than traditional stamped and welded assemblies.
Tooling and Workholding Systems August 1, 2002 “We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
What’s the Connection? June 1, 2004 A lot of attention is paid to the “business end” of CNC toolholders–the part that actually holds the tool.
