Geometry Lesson Teaches Corvette How to Lighten Up October 14, 2016 It’s been almost two decades since the C5 Corvette hit the streets with its groundbreaking chassis built around hydroformed steel bumper-to-bumper frame rails. The technology gave engineers a chance to create components that were both lighter and stiffer than traditional stamped and welded assemblies.
Advances in Hand-Held Metrology August 1, 2015 While high-end metrology devices like advanced laser scanners or precision CMMs garner a lot of attention, it is hard to imagine any industrial setting without the presence of work-a-day hand-held, contact metrology tools such as calipers or micrometers. That is what Justin Frazzini, quality manager for A.A. Jansson (Waterford, MI), retailer and calibration and repair service provider, observes in his practice.
MFG.com Offers Online Sourcing for Robotics Parts October 31, 2016 The simple proposition that no two automation solutions using robotics are alike because no two manufacturing processes are identical presented a major challenge to Daniel Drennen of Deshazo LLC (Alabaster, AL).
Companies Push the Boundaries of 3D Printing Composites October 26, 2016 Entrepreneurs and existing manufacturers are making 3D printers that automate production of composite parts, and are unique in their design.
Searching for the Perfect Lightweighting Recipe September 1, 2016 Lightweighting is so established it’s now part of marketing for new vehicles. Automakers routinely detail how much less models weigh than their predecessors. General Motors Co., for example, has said a range of its vehicles is anywhere from almost 250 lb (112.5 kg) to 700 lb (315 kg) lighter.
3D-Printed Parts Restore Cars’ Glory August 12, 2016 Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
Honeycomb Heroes: Making Composites for Aerospace June 24, 2016 There’s an old saw that if bumblebees were aeronautical engineers they would know they can’t fly. Quite apart from the miracle of their flight, bees also happen to make a lightweight structure of surprising strength, just the sort of thing you’d want if you were building aircraft: honeycomb.
Breathing Safely Around Metal 3D Printers February 8, 2016 When GE decided that additive manufacturing was the way to go for making metal fuel nozzles for its new LEAP engine, the company touched off interest in other shops to move 3D printers from the design studio to the factory floor. It also stepped up the focus on safety standards for metal AM.
Fiber Lasers Continue to Gain Market Share in Material Processing Applications February 1, 2016 The first kilowatt-class fiber laser for material processing was introduced by IPG Photonics in early 2002. Since that time, the adoption of fiber lasers for production applications has grown at a rapid rate. Today, fiber lasers are becoming the choice for most major production laser applications as well as converting traditional welding and cutting processes to fiber laser technologies.
Tool-Coating Advances Continue April 1, 2008 New coatings are going the boutique route, using multiple layers and new materials to optimize for a particular application