Workholding Solutions to Reduce Costs, Increase Throughput April 24, 2018 At the Nirvana Machine Shop on planet Perfection, every workpiece is clamped to a custom-built fixture mounted on a dedicated machine tool. Each workpiece is dimensionally identical to the one before and the one after. All the fixtures are totally automatic—instantly positioning, clamping, machining, inspecting, and releasing the part with the ultimate precision.
Marposs Introduces Software Package for Precision Probing December 19, 2019 Marposs said its new Mida Hyper Probing software can achieve an 80% reduction in cycle time, ensuring fast and precise probing.
Aerospace Machining Solves Challenges Big and Small April 3, 2019 Aerospace machining encompasses machines small and large. These range from the Tornos SwissNano to the Makino MAG3, as Rich Sullivan put it. He is the OEM manager for Iscar Metals Inc., Arlington, Texas.
Mastercam Blends New Technology, Support and Beta Testing to Improve CAM Performance March 8, 2019 In 2018, CNC Software Inc., Tolland, Conn., reached several milestones: its 35th anniversary as a company, 250,000th installation, a new user website and the introduction of Mastercam 2019.
More Profitable Toolpaths August 7, 2019 Adaptive Milling. Dynamic Motion. hyperMILL. Profit Milling. VoluMill. Waveform machining. If you’re one of the lucky people who machines parts for a living, chances are about 50-50 that you’re using one of these or a comparable high-performance programming technology.
Siemens’ latest Simcenter Testlab release now available September 18, 2019 Simcenter Testlab enables better usage of test-based data, from design and simulation to validation and certification.
When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
Hot Techniques for Cutting High-Temperature Alloys August 1, 2018 For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.