Displaying 61-70 of 241 results for

Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.

Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.

One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.

There is no real problem with threading a pipe. Most DIY types can do it in their workshop with hand tools, but when the pipe is 40′ long and ordered by the ton, you are in oil country. Pumping crude oil out of the ground requires drill pipe, casing, tool joints, tees, crosses, flanges, and couplings. All those items need to be machined. And that takes specialized workholding.

Industry 4.0 is often referred to as smart manufacturing, where technology enables interconnectivity for machines and manufacturing software and systems. It also provides “Big Data,” increased visibility and remote access to manufacturing assets.

Metalcutting Exhibitors at IMTS 2018 did not disappoint, nor were they disappointed with results from the largest version of the biennial event in terms of number of exhibitors, attendees and, more important, attendee leads.

Although drivers may not know it, cable connections for the airbags and seatbelt buckle systems in their vehicle simply would not work without components manufactured by ODW-Elektrik. A development partner and supplier for high-quality cabling, solenoids and mechatronic systems used in vehicles around the world, ODW-Elektrik supplies most of its products to Bosch, Autoliv, Brose, VW, and ZF.

Makers of machine tools used to produce gears are looking to the 2018 edition of IMTS to demonstrate how they’re meeting customer demands.

ANCA Inc. opened its technical center expansion May 23-24, 2018, in Wixom, MI, hosting more than 200 customers, vendors, and community members at the event. This multi-million-dollar investment provides a larger demonstration floor, classrooms for training, and a larger machine assembly and process development area.

If John Winter of toolmaker Sandvik Coromant (Fair Lawn, NJ) were to start his own machine shop, all of his machines would be equipped for through-spindle coolant (TSC).