When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
Hot Techniques for Cutting High-Temperature Alloys August 1, 2018 For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
Medical Machining Shifts Into High Gear—With a Laser Assist July 5, 2018 Constant refinement of medical machining from tooling design to finished product requires not only the ability to handle a broad range of plastic and metal materials but also to achieve predictable results—particularly in the face of strict regulations.
Using 3D Scanning to Find Pipe Problems at a Nuclear Power Plant December 3, 2018 Nuclear power has long been a clean, dependable source of energy throughout the world. However, as power plants age, concerns grow on their continued reliability. There are many components that make up the infrastructure of a nuclear power plant with the design intent to reduce radiation and contamination exposure to personnel, equipment, and the surrounding environment.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
PLM, Augmented Reality Sharpen the Cutting Edge March 2, 2018 Aerospace and defense manufacturing is known for its complex designs, continual changes and the need to negotiate tight margin requirements. At Elite Aviation Products (EAP), a division of Elite Aerospace Group (Irvine, CA), we face these challenges every day.
Quality Assurance Passes with Flying Colors at IMTS August 14, 2018 The world of quality measurement devices and software continues to expand, and IMTS years are especially exciting times. If there is a theme in the many offerings—new devices, new software—it might be how quality devices are continuing to burrow their way into the heart of manufacturing on the shop floor.
Optical Metrology in Three Dimensions May 29, 2018 Basic trends in modern manufacturing are driving growth in 3D optical metrology. “One is the highly complex and high-tech material that manufacturers are using today. For example, in the aerospace turbine blade market, they simply cannot touch the part like they used to—the surface finish of the material is too readily affected by any kind of contact metrology."
Metrology Certifications in the Knowledge Age May 7, 2018 Technology is changing ever more rapidly. Sometimes this means topics learned in engineering or technical school become obsolete. Whole new fields emerge within a few years, so that even those with freshly minted educations suddenly find themselves faced with new challenges.