When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
Hot Techniques for Cutting High-Temperature Alloys August 1, 2018 For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
Medical Machining Shifts Into High Gear—With a Laser Assist July 5, 2018 Constant refinement of medical machining from tooling design to finished product requires not only the ability to handle a broad range of plastic and metal materials but also to achieve predictable results—particularly in the face of strict regulations.
From Multispot Welding to Limiting Soot: Tips for Optimal Laser Joins September 28, 2018 In our May webinar titled “Lasers in Manufacturing: State of the Art in 2018,” we noted the emergence of some novel technologies to produce the “holy grail” of laser welding: spatter-free joins with no porosity and, when required, highly aesthetic outcomes.
Using 3D Scanning to Find Pipe Problems at a Nuclear Power Plant December 3, 2018 Nuclear power has long been a clean, dependable source of energy throughout the world. However, as power plants age, concerns grow on their continued reliability. There are many components that make up the infrastructure of a nuclear power plant with the design intent to reduce radiation and contamination exposure to personnel, equipment, and the surrounding environment.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
PLM, Augmented Reality Sharpen the Cutting Edge March 2, 2018 Aerospace and defense manufacturing is known for its complex designs, continual changes and the need to negotiate tight margin requirements. At Elite Aviation Products (EAP), a division of Elite Aerospace Group (Irvine, CA), we face these challenges every day.
Who Controls Feedstock Used in 3D Printers? March 2, 2018 Should the US Copyright Office oversee whether 3D printer operators can use feedstock not approved by their machine’s maker to turn out medical devices or airplane parts, or is that the role of the US Food and Drug Administration (FDA) and US Federal Aviation Administration (FAA), respectively?
NCMS, Moog Sign Agreement to Perform Work Supporting Adaptation of Blockchain Technology April 4, 2018 The National Center for Manufacturing Sciences (NCMS) (Ann Arbor, MI) and Moog Inc. (East Aurora, NY) have signed a contract to perform co-funded work in support of applying Moog’s VeriPart solution, adapting blockchain technology for additive manufacturing.