Displaying 61-70 of 77 results for

Aircraft manufacturers are finding noncontact metrology ever more useful. Its inherent high throughput and decreasing cost is complementing the industry’s ramp-up to meet the world’s appetite for more airplanes.

In an automobile engine, seven types of screws out of approximately 70 are considered critical to achieving the engine’s specified design performance, despite high vibration and heat. The seven include bolts for the cylinder head, crankshaft, con rod, flywheel, and main bearing cap, as well as for the camshaft cap, camshaft sprocket and VCT.

Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.

It’s easy to become dazed by the continuing stream of buzz words. For those of us in manufacturing, all this buzz creates a sense of impending change, but no clarity on what that change might be. Uncertainty means anxiety.

In today’s rapidly changing manufacturing landscape, Clemson University (Clemson, SC) takes a fresh approach to manufacturing education for the nation’s future automotive engineers.

It’s amazing what you can learn at a trade show. Editor in Chief Alan Rooks was reminded of this at the recent EASTEC show. He reflected on his visit with Joe Stanford, vice president, engineering and applications support for Applied Measurement Solutions LLC, Bristol, Conn., the largest metrology distributor for The L.S. Starrett Co., Athol, Mass.

Simulation in manufacturing is becoming much more pervasive. Advanced visualizations are used everywhere, from machining on shop-floor CNCs to offline CAD/CAM programming of NC equipment.

Canadian based 7D Kinematic Metrology Inc., has acquired Nikon Metrology’s iGPS dynamic tracking business. The closing of the transaction is expected to take place on March 31.

Not all threaded connections serve similar purposes.The load-carrying needs of an aerospace engine support bolt in a tension assembly greatly exceed those of a simple screw that fastens a cover plate to an electrical wall socket. International thread-acceptance documents and standards recognize this basic engineering fact, and incorporate different thread-inspection requirements into their verification standards.

At Cary Rosenberg’s company, Watts Water Technologies, validating material properties to ensure they are composed of the correct elemental composition is an important part of their work.