Toolpath Simulation, Optimization Boosts Part Manufacturing for Fixtures February 2, 2021 Those who manufacture precision workholding systems have the same goals and challenges as the machinists who use them. Both groups strive to reduce setup times and optimize cutting cycles. Secure, consistent, and accurate gripping is paramount.
New Cutter Bodies Boost Feed Rates, Lower Cycle Times on Very Large Parts January 28, 2021 A few years ago, two companies joined forces to greatly enhance productivity in heavy milling and crankshaft machining. Their combined efforts resulted in solutions to improve throughput and reduce costs by a factor of four in some cases.
The Sharpest Tool in the Box January 21, 2021 The word “reconditioned” can ignite visions of worn, overworked products inferior to new ones. The reality is as long as you purchase from a reputable supplier, reconditioned cutting tools will deliver the same consistent results as they did upon initial purchase.
You're Never Too Small for Industrial Robots February 19, 2021 Claudia Jarrett, U.S. country manager at automation parts supplier EU Automation, explains why robots are more than affordable for small and mid-sized enterprises (SMEs).
Formlabs Expands Additive Manufacturing Reach with Fuse 1 SLS Printer January 26, 2021 Formlabs, known for its line of desktop stereolithography (SLA) printers, is looking to expand its 3D printing reach with availability of its new Fuse 1 benchtop industrial selective laser sintering (SLS) 3D printer. Under development for nearly seven years, the Fuse 1 marks a notable change for Formlabs as they expand into a new additive manufacturing process.
Mastercam, FANUC Announce Optimized Five-Axis Post Processor for FANUC CNCs December 3, 2020 CNC Software Inc., developers of Mastercam CAD/CAM software, and FANUC America, a supplier of factory automation solutions, have introduced a new post processor designed to optimize five-axis capabilities in FANUC CNCs.
Sandvik Coromant Announces Metalcutting Collaboration with Autodesk December 3, 2020 Sandvik Coromant has announced a new partnership with Autodesk. The collaboration was officially announced on November 17, 2020 at Autodesk University 2020 — an online conference for design and manufacturing.
Shrink-Fit Technology Enhances Shop’s ROI November 25, 2020 Raym-Co Inc., located in Farmington, Conn., is a job shop with a 37,000 ft2 (3,065 m2) facility and approximately 60 CNC machines.
Drill Choice: Solid-Carbide or Replaceable-Insert? April 27, 2021 Selecting the best type of cutting tool for holemaking jobs is not always clear. It is best to have a drill that caters to the workpiece material, produces the specs required, and provides the most profit for the job at hand. Considering the variety of jobs and parts manufactured in machine shops, there is no “one-drill-fits-all.”
U.S. Cutting Tool Orders Rise on Monthly Basis in February May 5, 2021 February 2021 U.S. cutting tool consumption totaled $149.5 million, according to the U.S. Cutting Tool Institute (USCTI) and AMT – The Association for Manufacturing Technology. This total, as reported by companies participating in the Cutting Tool Market Report collaboration, was up 3.3 percent from January's $144.8 million and down 17.1 percent when compared with the $180.3 million reported for February 2020.
