Smarter, faster nesting software programs with better automation and other major improvements are helping fabricators and metalcutters at job shops and other builders inject a jolt of productivity into their factory operations.
Displaying 1-10 of 696 results for
At Cary Rosenberg’s company, Watts Water Technologies, validating material properties to ensure they are composed of the correct elemental composition is an important part of their work.
Proper drill selection, the geometry built into the drills themselves, applying proper drilling parameters, and a few tips and tricks from the pros can address nagging drilling problems such as drill breakage, unbroken chips, tool runout, poor hole edges, and poor tool life.
While 3D scanning has already been adopted by many automotive part manufacturers, the use cases in Quality Control (QC) have been limited.
Over its 140-year history, automotive manufacturing technology has evolved in parallel with progress in the vehicles themselves. Early automakers custom made individual “horseless carriages.” Later, standardized parts and moving assembly lines delivered mass-produced cars. Development of integrated transfer lines enabled part runs to extend for years.
In the 1955 short story “Autofac,” Philip K. Dick envisioned a world dominated by self-replicating robots that work incessantly, eventually depleting the planet’s resources.
As automation technology becomes more effective, cost effective, and easier to implement, job shops are automating more and more of their processes. In this episode, Alan Rooks, editor in chief of Manufacturing Engineering magazine, talks with Michael Gaunce, group manager, stationary workholding for Schunk Inc., about what a small to medium size job shop should consider when starting and exploration into automation; the particular machines or jobs that are easier to automate over others; why high part quantities are not needed in order to automate a job; what types of skills a shop should look for in employees working with automation; and how to define categories for the different styles of automation used in machine tool tending.
Deburring can sometimes be overlooked in production planning, but it is a critical part of forming and fabricating processes. In this podcast, part one of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing gained from decades of both hands-on manufacturing and academic work. Dr. Gillespie is also a past president of SME. In this episode, the discussion focuses on key issues that create burrs in casting/forging/ molding, blanking and bending operations, and the basics of deburring in three key areas: burr properties, acceptable deburring, and cost effective deburring.
As the automotive industry’s reawakening continues, less-expensive high-payload robots are gaining traction over more conventional fixed tooling among automakers focused on cutting costs while improving manufacturing productivity and processes.
Time is money and reliability is what a company’s reputation is built on. Chris Mahar, Associate Editor of Manufacturing Engineering, speaks with Mike Marr, Applications Technician at Hoffmann Group USA, about their Parabolic Performance Cutting (PPC) series and Garant Master Tap line. Discussing how manufacturers can reduce costs, provide process reliability and reduce machining times in both machining threads and 5-axis copy milling.