Displaying 81-90 of 1050 results for

Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.

In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.

Additive manufacturing, or 3D printing, has been a game changer in how products are designed, produced and manufactured. But 3D printed parts don’t just come out of the machine ready to use, sometimes intensive manual post-processing is required. Jeff Mize, CEO of PostProcess Technologies, sits down with Chris Mahar, Associate Editor, to discuss their automated post-processing technology and how fully digitalized additive manufacturing is further benefiting the industry.

Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.

Mark Kirby, Registered Professional Engineer and Additive Manufacturing Business Manager for Renishaw Canada and Bruce Morey, Senior Technical Editor for Manufacturing Engineering Magazine discuss the pluses and minuses of the still-emerging 3D printing technology that is sweeping the business press. We will take a look at common misconceptions and what, in our opinion, could be things to watch out for if any of our listeners are thinking about adopting 3D printing for their applications.

Kevin Smith, senior commercial application engineer at Markforged, explains how the Markforged Metal X 3D printing process works, for starters. He also gets into how FFF metal printing differs from DMLS and other processes. And he goes over materials that can be printed on the Metal X, as well as the applications that are best suited for metal 3D printing.

SME interviewed onsite at FABTECH Shawn Miely, Senior Marketing Manager for Pro Segment of MakerBot. Founded in 2009, MakerBot was one of the first companies to make 3D printing accessible and affordable with its first 3D printer, the Cupcake CNC. This podcast features a discussion about the new MakerBot Method X in general, new materials available, and additive manufacturing for professionals.

Cutting tool technology continues to advance, and manufacturers can take advantage of a wide range of new cutting tool products. In this episode, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Tim Easton, National Sales Manager for NTK Cutting Tools.

Thermwood Corp. has added a third print orientation to its LSAM Large Scale Additive Manufacturing systems.

Key steps are virtual twins and real relationships.