Displaying 121-130 of 138 results for

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.

Not all threaded connections serve similar purposes.The load-carrying needs of an aerospace engine support bolt in a tension assembly greatly exceed those of a simple screw that fastens a cover plate to an electrical wall socket. International thread-acceptance documents and standards recognize this basic engineering fact, and incorporate different thread-inspection requirements into their verification standards.

It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”

Machining composites presents unique challenges compared to metals. Reinforcement fibers are abrasive, shortening tool life. The plastic matrix carries away little heat, unlike metal chips, and overheating can melt the matrix.

The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.

Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.

Expanding use of ever-harder materials has opened the door to wider use of grinding processes on materials such as titanium, ceramics, and superalloys.

High-pressure water can simultaneously clean and deburr a workpiece, and hybrid systems can include mechanical deburring in the process.

Composites engineers are expanding their craft to build more complex, durable parts at higher production volumes. One way they are achieving this objective is by using infusion-molding processes based on Resin Transfer Molding (RTM) and Vacuum Assisted Resin Transfer Molding (VARTM).

Overall, there are two overriding customer needs: reducing cycle time and machine downtime. They want higher feed rates and depth of cut for greater metal removal.