Shop Roots Out Long Set Up Times with Advanced Automation December 7, 2018 Erik Anderson, president and CEO of Basin Precision Machining LLC, has determined that setups are the root of all evil when it comes to manufacturing productivity. They cause part variations, downtime, and high-percentage scrap rates.
When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
Advanced Cutting Tools Rev Up Milling Operations November 5, 2018 Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.
Medical Machining Shifts Into High Gear—With a Laser Assist July 5, 2018 Constant refinement of medical machining from tooling design to finished product requires not only the ability to handle a broad range of plastic and metal materials but also to achieve predictable results—particularly in the face of strict regulations.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
New Line of Hydraulic Chuck Extensions Targets Long-Reach Applications March 2, 2018 Celebrating its 80th year, Kennametal, the Latrobe, (PA), tooling manufacturer, says it has solved the age-long problem of tool stability when drilling in deep cavities, alongside tall shoulders, and past bulky fixtures. Reaching deep inside a workpiece to drill holes can be challenging.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
Metrology Tools for In-Process Inspection October 12, 2017 While suppliers are under more pressure than ever to produce precision parts faster and with less scrap, in-process metrology means manufacturers can detect as soon as possible when a part is going wrong, correcting the issue quickly and saving it from scrap.
The Quest for Safer 3D Printing Materials October 18, 2017 When Desktop Metal introduced its “office-friendly” Studio metal prototype printer earlier this year, the company renewed attention on the issue of safer materials for binder jetting, an additive manufacturing method.
Kennametal Names Christopher Rossi CEO June 29, 2017 Kennametal Inc. (Pittsburgh) announced June 29 that its board of directors has appointed Christopher (Chris) Rossi as president and CEO and has named him a director. Rossi succeeds Ron De Feo, whom the board has appointed executive chairman. Both appointments are effective August 1.