Lean at NUMMI September 1, 2005 To remain competitive in the fiercely contested North American automotive industry, the New United Motor Manufacturing Inc. (NUMMI, Fremont, CA) assembly plant, a joint venture between Toyota Motor Corp. (Aichi Prefecture, Japan) and General Motors Corp. (Detroit), has rededicated its efforts in lean manufacturing during the past few years by applying key tenets of the Toyota Production System (TPS).
The Ins and Outs of In-Line Automated Inspection July 1, 2012 The challenges to manufacturing as it evolves into the 21st century are now familiar, and impact how metrology must contribute. Manufacturers face uncertain production volumes with roller-coaster demand, shorter production runs and faster product development cycles. Automation, while alluring as a way to reduce cost, needs to adjust.
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
Shop Roots Out Long Set Up Times with Advanced Automation December 7, 2018 Erik Anderson, president and CEO of Basin Precision Machining LLC, has determined that setups are the root of all evil when it comes to manufacturing productivity. They cause part variations, downtime, and high-percentage scrap rates.
Using 3D Scanning to Find Pipe Problems at a Nuclear Power Plant December 3, 2018 Nuclear power has long been a clean, dependable source of energy throughout the world. However, as power plants age, concerns grow on their continued reliability. There are many components that make up the infrastructure of a nuclear power plant with the design intent to reduce radiation and contamination exposure to personnel, equipment, and the surrounding environment.
From Multispot Welding to Limiting Soot: Tips for Optimal Laser Joins September 28, 2018 In our May webinar titled “Lasers in Manufacturing: State of the Art in 2018,” we noted the emergence of some novel technologies to produce the “holy grail” of laser welding: spatter-free joins with no porosity and, when required, highly aesthetic outcomes.
Change-up Pitch: From Metal to Plastic October 2, 2014 Even though it’s been around since the 1950s, when engineering-grade resins were first introduced, many manufacturers still are not familiar with the many benefits that metal-to-plastic conversion provides.
Connecting the Digital World with the Factory Floor April 1, 2014 The classic manufacturing conundrum is how to make products quicker, cheaper, and better.
Measure It On The Machine January 1, 2013 Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.