Even though it’s been around since the 1950s, when engineering-grade resins were first introduced, many manufacturers still are not familiar with the many benefits that metal-to-plastic conversion provides.
Today, the productivity needed to be globally competitive requires ever increasing metal-removal rates during operations such as roughing and high-speed slotting. Process reliability is paramount, especially when working with difficult-to-machine materials.
Sales of cars and light trucks plummeted during the Great Recession and General Motors Co. and Chrysler emerged from government-back bankruptcies in 2009. Since then, total industry deliveries have surged, hitting a record 17.47 million in 2015, according to Autodata Corp.
At the Nirvana Machine Shop on planet Perfection, every workpiece is clamped to a custom-built fixture mounted on a dedicated machine tool. Each workpiece is dimensionally identical to the one before and the one after. All the fixtures are totally automatic—instantly positioning, clamping, machining, inspecting, and releasing the part with the ultimate precision.
Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.
When Desktop Metal introduced its “office-friendly” Studio metal prototype printer earlier this year, the company renewed attention on the issue of safer materials for binder jetting, an additive manufacturing method.
In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
