Displaying 101-110 of 149 results for

The challenge of machining hip replacement implants out of cobalt chrome

“Five years ago, our fit and finish was below average,” said Dr. Raj Kawlra, director of dimensional strategy and management of Chrysler Group (Auburn Hills, MI). “To be the future world-leaders, we knew that we had to focus on all aspects of quality … vehicles that look good, feel good, sound good, and are reliable.”

It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”

The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.

Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.

A lot of attention is paid to the “business end” of CNC toolholders–the part that actually holds the tool.

“We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”

Mazak Corporation has announced its acquisition of MegaStir, a supplier of friction stir welding (FSW) tools and technology located in Provo, Utah.

Materials science has opened new possibilities for designers of cars, planes and other products. Metal alloys are now as precisely engineered as they are machined. The result is longer lasting, stronger parts. But with a wider selection of materials comes risk—how can you be sure that one piece of gray metal stock is different than another? Careful warehousing procedures and paperwork only go so far.

The rules of thumb for shops experienced in five-axis machining aren’t any different from those for first- time users of this sophisticated machining process. The difference is that the experienced shop has already traveled the learning curve for five-axis machining.