Skip to content

Southeastern Manufacturing Shines Bright at SOUTHTEC 2019

November 14, 2019
Every other year, manufacturers in the Southeast get to shine and showoff at SOUTHTEC. More than 5,900 manufacturing professionals and leaders descended on Greenville, S.C., for this year’s event to see the latest equipment, tools, software, training and technologies driving manufacturing today.
Chris Mahar
By Chris Mahar Associate Editor, SME Media

Hexagon and University of Rhode Island Form Collaborative Partnership for Advanced Manufacturing

November 15, 2019
Hexagon's Manufacturing Intelligence division announced today it has formed a collaborative partnership with the University of Rhode Island, College of Engineering.
By Hexagon Manufacturing Intelligence Press Release
More than 5,900 manufacturing professionals and leaders descended on Greenville, S.C., for SOUTHTEC 2019.

Southeastern Manufacturing Shines Bright at SOUTHTEC 2019

November 14, 2019
Every other year, manufacturers in the Southeast get to shine and showoff at SOUTHTEC. More than 5,900 manufacturing professionals and leaders descended on Greenville, S.C., for this year’s event to see the latest equipment, tools, software, training and technologies driving manufacturing today.
Chris Mahar
By Chris Mahar Associate Editor, SME Media
Members of Team Witch Doctor and Mastercam employees at CNC Software headquarters.

Mastercam Celebrates BattleBot Team Witch Doctor’s Success

November 13, 2019
November 12, 2019 (Tolland, Conn.) – Mastercam, CAD/CAM software developed by CNC Software, Inc., was proud to be on display as a sponsorship partner of Team Witch Doctor in season 9 of Discovery’s BattleBots series.
By Mastercam Press Release
NTK Cutting Tools Logo

Using Advanced Cutting Tool Technology to Improve Productivity

November 13, 2019
Cutting tool technology continues to advance, and manufacturers can take advantage of a wide range of new cutting tool products. In this episode, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Tim Easton, National Sales Manager for NTK Cutting Tools.
Alan Rooks
By Alan Rooks Editor in Chief, Manufacturing Engineering

Step Up Your High Speed Machining Game with These 5 Books

November 12, 2019
Modern machining is all about speeds and feeds. The old school slow, heavy cuts that were very popular back in the day have been replaced with a new way of machining parts characterized by fast, lighter cuts.
By Practical Machinist Sponsored Content

LIFT Receives $5 Million Department of Defense Grant To Expand “Operation Next” Across the Country

November 12, 2019
LIFT – Lightweight Innovations For Tomorrow, announced today it received a $5 million grant to expand the program to nine additional military bases across the country over the next three years.
By LIFT Press Release
  • Latest Videos

  • Connect With SME Media

Expert Opinions & Resources

  • Expert Opinion

    U.S. on Verge of New Status as a Net Energy Exporter

    November 7, 2019
    The United States is about to begin a new era as a net energy exporter, according to U.S. Energy Department projections. The shift will snap a 67-year streak of being a net energy importer, going back to 1953.
    By SME Media Staff
  • Expert Opinion

    Barriers to Industry 4.0 Are Falling Fast

    November 5, 2019
    For years, manufacturers of all sizes and across every industrial segment have heard about Industry 4.0. The definition changes depending on the speaker or publication, but the essential idea remains the same.
    By Michael Ruppenthal - General Manager, OMAX Corp.
  • Alan Rooks
    Expert Opinion

    FABTECH Keeps the Heat On

    October 31, 2019
    FABTECH is coming to my home town, Chicago, and I’m looking forward to it. Along with IMTS and EMO, it’s one of the top-shelf manufacturing trade shows and it’s big enough to keep people coming back every year to see new technology, get educated and network with their peers.
    By Alan Rooks - Editor in Chief, Manufacturing Engineering

 

Latest Magazine Editions

 

Manufacturing Engineering

Manufacturing Engineering

Fabrication technologies continue to advance, with processing speeds increasing in laser cutting, welding, EDMing and waterjet cutting. In the November 2019 issue, Manufacturing Engineering takes an in-depth look at these technologies and previews FABTECH 2019 in Chicago.

View Digital MagazineSubscribe

 

Smart Manufacturing

Smart Manufacturing

Read the November 2019 edition of Smart Manufacturing magazine, which includes specific examples of American, German and Swedish manufacturers seeing an uptick in productivity after adding a factory within a factory via an automated machining cell.

View Digital MagazineSubscribe

Advertise With Us!

Everyday manufacturing professionals come to SME’s platform of print and digital offerings. SME Media is constantly working to position itself where the manufacturing community is consuming its latest and greatest breaking stories and trends.