Skip to content

Wohlers Associates Publishes Report on Post-Processing

By Wohlers Associates Inc. Press Release
Wohlers-chart.jpg
This chart presents the cost segmentation between pre-processing, printing and post-processing among companies that offer both metal and polymer AM.

Fort Collins, Colo. — The new Wohlers Associates report “Post-Processing of AM and 3D-Printed Parts” details many time-consuming and often expensive steps in post-processing parts made by additive manufacturing (AM). Examples include support material removal, surface finishing, coloring and coating, and heat treatment.

Organizations involved with AM have vast amounts of post-processing knowledge and experience, yet little systematic documentation is available. This has led to countless companies “reinventing the wheel” and spending time and money unnecessarily to complete jobs. The methods and techniques described in this report can reduce the trial-and-error upon which so many organizations rely.

Post-processing is one of three major phases of producing 3D printed parts. According to research conducted for Wohlers Report 2021, nearly 27 percent of the cost of producing AM parts comes from post-processing. The study included input from 124 service providers in 27 countries.

When calculating the cost of post-processing, it is critical to consider the entire end-to-end workflow, Wohlers Associates explained. Bottlenecks are a challenge, especially when scaling into production quantities. The post-processing steps for metal powder bed fusion (PBF) include the removal of powder, thermal stress relief and the separation of parts and support material from the build plate. They also include the removal of supports from parts, media blasting, and machining and grinding. Some parts may require hot isotropic pressing, additional heat treatment, anodizing and inspection. If post-processing is not scaled and streamlined accordingly, bottlenecks will occur, especially with large quantities.

Design for additive manufacturing is a key to reducing post-processing time and costs. For example, Wohlers Associates advised, orient metal PBF parts so the faces to be machined are facing downward. These down-facing surfaces will be rough due to the support material, so use this to your advantage.

More information on the new report is available here.

  • View All Articles
  • Connect With Us
    TwitterFacebookLinkedInYouTube

Always Stay Informed

Receive the latest manufacturing news and technical information by subscribing to our monthly and quarterly magazines, weekly and monthly eNewsletters, and podcast channel.