Skip to content

The Anatomy of a Telescopic Gauge

By Practical Machinist Sponsored Content

Telescoping gauges are indirect measuring devices used to measure the internal diameter of a bore, hole, groove, slot, etc. This T-shaped tool consists of a handle, two telescopic rods and a locking screw.

Picture2 Resized.jpg

There are telescopic gauges with two plunging telescopic rods and others with only one. With the help of a micrometer, the telescopic rods measure the distance of the bore. The ends of the rod are the shape of a half circle (called the radius edge), which is responsible for getting accurate measurements. Gently twisting the locking screw clockwise secures the telescopic rod(s) into position. When twisted counterclockwise, the screw is released, and the telescopic rods can move freely again.

How to Use Telescopic Gauges

Developing a good feel for the tool requires a little bit of practice. Collapse both measuring heads by rotating the locking screw counterclockwise. Place the gauge into the bore with one head held in place against the wall of the bore. Begin to loosen the screw, but not by too much because the rods are spring-loaded. Proceed to tilt the gauge so the rods are inclined just a touch above horizontal, then tighten the locking screw (clockwise). Whichever end you lifted first, force it downward (the opposite way), slowly through the bore. As you do this, wiggle the gauge back and forth. This will allow the gauge to find its smallest size on the spring. Finally, measure with a calibrated micrometer.

Are Telescope Gauges Reliable?

Due to the touchiness of telescopic gauges, different machinists have different techniques. Some metalworking community members argue telescoping gauges are unreliable in terms of repeatability. However, once you develop your feel for the tool, they are a good option. Repeatable results just take a bit of practice.

Here’s machinist and YouTuber Adam Booth with his non-traditional approach.

Recommended models

Starrett S579GZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set

Starrett.jpg

With two plunging telescopic rods, this set is best for measuring both to tenths and thousandths.

Mitutoyo 155-903, 5/16" to 6", 6-piece Telescoping Gage Set

Mitutoyo.jpg

Best for projects requiring long reach. The set has two plunging legs and is known to provide good feel and lock up.

Fowler 52-470-006 Steel Telescoping Gage with Double Action Rigid Handle

Fowler.jpg

Features a rigid rod which is helpful for grip.

6 Pc Precision Telescoping Gage Set 5/16" - 6" Range T-Bore Hole Gauges w/ Pouch

Precision.jpg

They’re no Starrett, but you already knew that! Doublecheck your work and you will be good to go.

Anytime Tools Bore Gauge 6 pc 5/16"-6" Premium Telescopic High Precision T-Gage Set w/ Hard Shell Case

Anytime Tools.jpg

Best for projects that need to be measured in fractions of an inch, not thousandths.

There are other tools that can help measure the diameter of a hole. If you’re interested in hearing what Practical Machinist members think about bore measuring tools, join the conversation here.

This post may contain affiliate links.

Sponsored by:
Practical-Machinist-300x120.jpg

This article was prepared by Practical Machinist, which is solely responsible for its content.

  • VIEW ALL ARTICLES
  • Connect With Us
    TwitterFacebookLinkedInYouTube

Related Articles

  • Electric vehicle parts being inspected with a Renishaw Equator gaging system.
    Measurement & Metrology

    Gages Step Up the Tech

    July 27, 2020
    Sophisticated metrology equipment, like coordinate measuring machines (CMMs) and laser scanners, are increasingly seen outside quality labs. “Many companies have cut costs by moving inspection from the lab to the shop floor,” said Matteo Zoin, head of marketing and new market development for Marposs Corp., Auburn Hills, Mich.
    By Bruce Morey - Senior Technical Editor, SME Media
  • Christopher Mendicino Vice President of Product  High QA Inc.
    Measurement & Metrology

    QA Advances as Gage Management Improves

    July 23, 2020
    Any manufacturer operating under quality management system mandates, such as ISO9001, ISO13485, or AS9100, must at the very least maintain a measurement tool library database.
    By Christopher Mendicino - Vice President of Product , High QA Inc.
  • Heidenhain’s new West Coast headquarters in San Jose, Calif.
    Measurement & Metrology

    Heidenhain Opens Expanded Western U.S. Headquarters

    July 8, 2020
    Heidenhain Corp. has opened its newly completed West Coast headquarters. This includes the expansion of its executive, sales and technical support offices, as well as demo facilities in San Jose, Calif. The company also maintains a Midwest headquarters in Schaumburg, Illinois.
    By Heidenhain Corp. - Press Release

Always Stay Informed

Receive the latest manufacturing news and technical information by subscribing to our monthly and quarterly magazines, weekly and monthly eNewsletters, and podcast channel.