Skip to content

Choosing an Optimum Machining Solution for Aerospace Components

By Michael Defer Executive Vice President, Chiron America

Producing complex aerospace parts, such as vanes, blisks and impellers, requires a particularly fast, very precise and extremely dynamic machining center. For manufacturing critical components used in engine and turbine construction, this means a 5-axis machining center. Machines for highly dynamic milling with five simultaneously controlled axes are essential for producing reliable aircraft engine components.

A developer of CNC-controlled vertical milling and turning centers, the Chiron Group has recently brought a machining center to market precisely matched to the special requirements of the aviation sector: the FZ 16 S five axis with 5-axis tilt rotary table.

The FZ 16 S five axis with 5-axis tilt rotary table is the ideal solution for meeting the special requirements of the aerospace sector. Photos courtesy Chiron

Optimum solutions for machining complex aerospace workpieces from exotic materials must provide superior rigidity for stable machining, high spindle speeds to make best use of cutting tools designed for shaping challenging metals, and rapid axis positioning to minimize cycle times. The result is production of high precision parts with high quality surface finishes in minimum time.

The mineral cast machine bed of the Chiron FZ 16, with rigid gantry design delivers a high degree of stiffness, and optimum damping characteristics. High-performance motors, two Y-axis drives, as well as short spindle start-up and braking times are the foundation for the machine’s extreme speed. A-axes and C-axes equipped with direct drives deliver even greater dynamics. These machine characteristics assure precise multi-axis motion, and smooth acceleration, which are fundamental requirements for high-level aerospace manufacturing.

“A key development for the Chiron machines, providing greater stability for the heavier cuts and the rapid axis positioning is the gantry-style construction rather than a C-frame,” a company spokesman said. “This construction will be seen in future Chiron Group machines. The base is a vibration-dampening, highly stable concrete material that is less sensitive to heat than cast iron or steel weldments. Even during heavy cuts, the machine runs nearly without vibration or noise.”

Combining high precision metal removal with high feed rates yields a machine that can hog material while delivering high quality surfaces.

This capability is of great interest to producers of aerospace blisks and turbine blades, and complex parts from high alloy and exotic metals such as titanium, Inconel and stainless steels.

The ability to produce finished parts rapidly in a single setup saves cycle time and avoids the need for secondary operations.

“The exotic materials used for aerospace applications present challenging demands for high accuracy machining,” said Markus Löhe, aerospace sales engineer at Chiron. “The complex part geometries and the need for smooth surfaces require 5-axis simultaneous machining capability.”

For example, a blisk consists of up to 120 individual blade components on a disk and has a diameter of around 800 millimeters.

Workpieces of this kind can only be consistently produced on a fast, high accuracy machining center, such as the Chiron FZ 16 S 5-axis.

“Blisks are currently machined on Chiron machines from Inconel at one of our major customers in the sector, where the new FZ 16 S five axis machining center delivered excellent results from the first workpiece,” Löhe said.

Turnkey customer solutions from Chiron

Turnkey machines are particularly important for the aerospace sector as they reduce handling and therefore promote not only lower cycle times but higher machining accuracy.

The manufacturing operations for complex precision parts in the aerospace sector require a particularly fast, very precise, and extremely dynamic machining center.

These complete solutions with end-to-end automation are matched to individual customer requirements at Chiron. The Chiron Group generates more than a third of its revenue from turnkey machining centers every year.

In addition to the workholding fixture and selecting the most effective cutting tools, the software provided in the turnkey system also makes a contribution to greater productivity and dynamics in aerospace machining applications.

The software systems in the Chiron SmartLine portfolio make full use of the performance offered by the machining centers. For example, maintenance work and repairs can be planned in a targeted way with the ConditionLine IT system, which allows productivity to be significantly improved. This software detects signs of wear, as well as atypical behavior early on during operations, which helps prevent costly downtimes before they occur.

In terms of CNC control systems, customers can choose between the established solutions in the market, such Siemens, Fanuc and Heidenhain.

See the video of the FZ 16 in action

  • View All Articles
  • Connect With Us

Always Stay Informed

Receive the latest manufacturing news and technical information by subscribing to our monthly and quarterly magazines, weekly and monthly eNewsletters, and podcast channel.