Skip to content

Strengthened Manufacturing Research at NAMRC 45

Lihui Wang
By Lihui Wang, PhD, FSME, PE Professor and Chair of Sustainable Manufacturing, KTH Royal Institute of Technology, 2016-18 NAMRI/SME Scientific Committee Chair, SME Member Since 1999

The North American Manufacturing Research Conference (NAMRC) is the flagship event of the North American Manufacturing Research Institution of SME (NAMRI/SME)—the premier international forum where academic and industrial leaders in manufacturing interact with each other and advance the field. The distinctive feature of NAMRC is the presentations and critical discussions of research on technical innovations and new methods and applications of leading-edge technology from around the world.

The first NAMRC was organized in 1973 by a group of researchers interested in discussing and disseminating research results in the field of manufacturing. For its first few years, the event was known as the North American Metalworking Research Conference, but the word “manufacturing” soon began to be used to recognize the expanding base of research. From its inception in 1973 until 1981, NAMRC was facilitated through its Scientific Committee. In 1982, NAMRC became an affiliated organization of the Society of Manufacturing Engineers (SME) and became known as NAMRI/SME.

NAMRI/SME brings together researchers from leading companies, government laboratories, academic institutions and industrial think tanks located around the world for the purpose of advancing the scientific foundation of discrete-parts manufacturing. This group’s work covers refining fundamental technologies and developing emerging technologies and processes for material removal and material forming, as well as research on manufacturing modeling, simulation, monitoring and control systems.

A bound volume of papers presented at NAMRC has been produced, under the titles Proceedings and Transactions, from 1973 to 2010, to serve as a permanent record of the research ideas and results presented and discussed at the annual conference. Beginning in 2011, the Proceedings of NAMRI/SME was published in CD format only, and in 2015 Elsevier’s Procedia Manufacturing became the publishing venue for the Proceedings of NAMRI/SME that has faithfully documented the tremendous evolution of manufacturing science and technology.

After 44 successful years, NAMRC has been recognized as the preeminent international forum for presentations and dissemination of original basic and applied research in advanced manufacturing. This year, NAMRC 45 will be hosted by University of Southern California on June 4–8, 2017, in Los Angeles. Manufacturing has regained the global recognition and increased investment in research funding support due to its impact to transform the society. This is represented in the quality and quantity of the 142 accepted research papers, out from 176 full paper submissions, to be presented at NAMRC 45.

The publication of Proceedings of NAMRI/SME in Procedia Manufacturing has broadened the availability of NAMRC papers and helped the dissemination of our manufacturing research findings.  Top NAMRC papers will be selected and fast-tracked to SME’s Journal of Manufacturing Systems (JMS) and Journal of Manufacturing Processes (JMP), also published by Elsevier.

The Scientific Committee of NAMRI/SME is responsible for NAMRC paper review and quality control. Six thematic tracks are included in the Scientific Committee for NAMRC 45, as illustrated in the organization chart below. Several members of the Scientific Committee also serve in JMS or JMP as associate editors who can safeguard the quality of fast-tracked NAMRC papers to the journals.

NAMRI_SME_Scientific_Committee_Structure.jpg

Because of the increased number of paper submissions to NAMRC 45 and reduced paper acceptance rate to 81%, the quality of accepted NAMRC papers is further strengthened this year. Moreover, to encourage industrial participation in NAMRC 45, opportunity for presentation only is made available to industrial participants to share the state-of-the-practice and best practice in manufacturing companies.

NAMRC 45 is collocated with ASME’s Manufacturing Science and Engineering Conference (MSEC) and JSME’s (Japan Society of Mechanical Engineers) International Conference on Materials and Processing (ICM&P). It is expected that more than 600 people will attend the three co-located manufacturing conferences for knowledge exchange and networking. The registration to NAMRC 45 is open. More information about the conferences can be found at 2017namrc-msec.usc.edu.

NAMRI/SME Introduces New Award and Competition

To encourage truly visionary concepts of research and education, the inaugural NAMRI/SME Dornfeld Manufacturing Vision Award and Blue Sky Competition, funded by the National Science Foundation, recognizes outstanding vision and leadership within the manufacturing community. The award was named in honor of the late David Dornfeld, PhD, FSME, a longtime SME member and leader of the Laboratory for Manufacturing and Sustainability at UC Berkeley, who passed away unexpectedly in March 2016 at 66. Dornfeld was regarded as a global leader in sustainable manufacturing and smart manufacturing. A special “Blue Sky Ideas” track will be held on June 6 to emphasize visionary ideas, long-term challenges, and opportunities in research and education that are outside of the current mainstream of manufacturing education and research. Learn more at sme.org/blue-sky-competition.

  • Latest Videos

  • Connect With SME Media

Latest News

  • Tools to Reduce Time and Money

    December 13, 2019
    Time is money and reliability is what a company’s reputation is built on. Chris Mahar, Associate Editor of Manufacturing Engineering, speaks with Mike Marr, Applications Technician at Hoffmann Group USA, about their Parabolic Performance Cutting (PPC) series and Garant Master Tap line. Discussing how manufacturers can reduce costs, provide process reliability and reduce machining times in both machining threads and 5-axis copy milling.
    By Chris Mahar - Associate Editor, SME Media
  • Stamping, Forming & Fabricating

    Amada Opens New N.C. Plant; Tech Center to Follow

    December 11, 2019
    Amada America Inc., Buena Park, C.A., a supplier of precision sheet metal production equipment and related systems, has expanded its customer coverage in the Southeast with the opening of a 190,000 ft2 (17,652 m²) manufacturing facility near High Point, N.C.
    By Bob Puhr - Contributing Writer
  • The New Imperative: Improving Operations Through Industry 4.0

    December 11, 2019
    When it comes to being successful, manufacturers today have more tools than ever to succeed. Chris Mahar, Associate Editor of Manufacturing Engineering, talks with Jeff Lage, President, Advanced Manufacturing Technologies at Ellison Technologies, about how Industry 4.0 is helping manufacturers improve operations through data collection and insights. Providing tips on how businesses can get the most capacity out of their machines, remove waste and enable their machines do more.
    By Chris Mahar - Associate Editor, SME Media

Webinars, White Papers and More!

SME's Manufacturing Resource Center keeps you updated on all of the latest industry trends and information. Access unlimited FREE webinars, white papers, eBooks, case studies and reports now!