Mazak Acquires MegaStir December 3, 2018 Mazak Corporation has announced its acquisition of MegaStir, a supplier of friction stir welding (FSW) tools and technology located in Provo, Utah.
Optimizing Oil Country Workholding November 29, 2018 There is no real problem with threading a pipe. Most DIY types can do it in their workshop with hand tools, but when the pipe is 40′ long and ordered by the ton, you are in oil country. Pumping crude oil out of the ground requires drill pipe, casing, tool joints, tees, crosses, flanges, and couplings. All those items need to be machined. And that takes specialized workholding.
Advanced Cutting Tools Rev Up Milling Operations November 5, 2018 Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.
A Supermarket for Tooling and Workholding November 5, 2018 If you’re looking for new solutions to tooling and workholding challenges, IMTS was a great place to start. The bi-annual trade show, held this past September in Chicago, allowed shops to browse for the “latest and greatest” technologies.
Sorting Out the Options Leads to Successful Presetting November 2, 2018 With the number of offline and in-process toolsetting options on the rise, developing a way to efficiently utilize this technology can be confusing. Which presetter should we buy? What about the software that’s so often part of these systems—do we really need it?
Delta Machine Co.: High Torque Retention Provides Stability for Machining Exotic Metals October 31, 2018 Titanium, stainless steel, aluminum and other super-alloys and exotic materials are on the rise for use in component manufacturing in growth industries such as aerospace, medical, and automotive.
Five-Axis Workholding: Modular Approach Yields Many Benefits October 30, 2018 The rules of thumb for shops experienced in five-axis machining aren’t any different from those for first- time users of this sophisticated machining process. The difference is that the experienced shop has already traveled the learning curve for five-axis machining.
Is Leveraging the IoT Really ‘Smart Manufacturing’? October 29, 2018 Industry 4.0 is often referred to as smart manufacturing, where technology enables interconnectivity for machines and manufacturing software and systems. It also provides “Big Data,” increased visibility and remote access to manufacturing assets.
The Wonders—and Worries—of Round Tool Reconditioning October 29, 2018 One of the great benefits of solid round cutting tools is the ability to resharpen them after heavy use. Done right it’s like having a cat with nine lives: Dull…then like new. Dull again…and like new again. And since the cost to recondition solid tools is generally lower than the cost to replace them, there’s an economic benefit. The question then becomes what’s the best way to achieve the greatest possible benefit?
When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
