Round inserts promote better profiling with long overhangs in narrow grooves October 16, 2019 Cutting tool and tooling system specialist Sandvik Coromant is adding round geometry (-RM) inserts to its program of CoroCut® QD parting-off and grooving tools.
5 Books for Tool & Die Makers October 14, 2019 Machinists and toolmakers are often confused for one another. Their expertise and job descriptions might seem similar to an outsider, but as Practical Machinist’s forum members like to point out, there is a significant difference between them.
Go Off the Charts for Toolholder Torque Settings October 10, 2019 For years, collet-type toolholder assembly and setup have relied on cumbersome, error-prone manual methods that waste time and money.
Toolholding Applications Offer Win-Win Scenarios October 7, 2019 Defeating chatter, increasing speeds and feeds, defeating pullout, and reducing cycle times hold the keys to success.
YG-1 Adds SV-Point Spade Drill Inserts September 25, 2019 YG-1, Vernon Hills, Illinois, has added SV-Point spade drill inserts to its product line. The inserts provide longer tool life at higher spindle speeds and feeds than conventional spade drills, according to the company.
When Is Hard Turning the Right Solution? September 10, 2019 Hard turning has long been used for finishing when it comes to high-volume applications. Now, tooling suppliers have pushed cubic boron nitride (CBN) insert technology further, with geometric innovations that further increase the efficiency—and cost-effectiveness—of hard turning.
Deep Hole Drilling Aids Change in Auto Manufacturing September 9, 2019 The future of the auto industry is interesting but uncertain. No one knows how quickly electric vehicles are going to replace gasoline- and diesel-powered vehicles, how completely it will happen, and when it will occur in passenger cars as opposed to SUVs and heavy trucks.
Tooling & Workholding Tooling & Workholding Stay informed with the latest insights, news, resources and products in Tooling & Workholding to improve your manufacturing career and operations. tooling and
Sunnen to Open Manufacturing Plant in Monterrey, Mexico September 3, 2019 Sunnen Products Co. is expanding its global production footprint, opening a manufacturing facility in Monterrey Mexico to complement its production in the U.S., China, Switzerland, and Brazil. Sunnen, a large, integrated manufacturer of precision bore creation and finishing equipment, will move a portion of its abrasive and tooling products from its St. Louis operation to the Monterrey facility.
U.S. Cutting Tool Consumption Up 3.2 Percent for 2019 Through June August 21, 2019 U.S. cutting tool consumption totaled $198.9 million according to the United States. Cutting Tool Institute (USCTI) and AMT – The Association For Manufacturing Technology. This total, as reported by companies participating in the Cutting Tool Market Report collaboration, was down 6.8 percent from May’s $213.4 million and down 6.3 percent when compared with the $212.4 million reported for June 2018.