Workholding Solutions to Reduce Costs, Increase Throughput April 24, 2018 At the Nirvana Machine Shop on planet Perfection, every workpiece is clamped to a custom-built fixture mounted on a dedicated machine tool. Each workpiece is dimensionally identical to the one before and the one after. All the fixtures are totally automatic—instantly positioning, clamping, machining, inspecting, and releasing the part with the ultimate precision.
Digital Tool Data Refines Machining, Helps Industry 4.0 Find Its Way April 24, 2018 It’s said you don’t know where you’re going if you don’t know where you’ve been. For Industry 4.0 and advanced manufacturing, digital libraries provide that map.
Replaceable Tip Drills Offer Versatile Design Improvements April 24, 2018 Since their introduction about 20 years ago, replaceable-tip drills have become increasingly accurate and cost-effective alternatives to solid carbide units.
Shrink-Fit Toolholder Offers Consistency When Setting Tools April 23, 2018 Shrink-fit toolholding is a simple concept—an induction coil is adjusted and fits over the top of the toolholder. The induction coil heats the toolholder end of the shrinker, expanding the inside diameter, which opens the engagement bore (IDs of shrink-fit toolholders are smaller than the shank diameter of the cutting tool).
Big, Heavy, Awkward Parts Need Workholding, Too April 23, 2018 If you’ve ever seen industrial wind turbine components on the back of a flatbed truck rolling down the highway, you have a good idea of what a large, heavy, difficult-to-handle workpiece is. For example, with a single blade on the GE 1.5 mW turbine being almost as long as a football field, the entire blade assembly weighs about the same as 36 small cars.
New Tool Designs Power Faster-Than-Ever Cutting April 23, 2018 Industry veterans often say the makers of machine tools, cutting tools, CAD/CAM software, and other components push each other in an endless feedback loop to deliver ever faster cutting speeds in ever harder materials. Lately it’s the cutting tool manufacturers who seem to be leading the charge. Let’s see what they’re up to.
When the Going Gets Tough, Tough Toolholders Get Going April 23, 2018 As machining has evolved, toolholders have advanced to include rigid, secure systems with anti-pullout protection. These advanced systems are needed to take on difficult-to-machine materials, such as titanium and heat-resistant superalloys (HRSA), and accommodate ambitious removal rates and long tool overhangs. Think of them as insurance against tool pullout and breakage—a situation nobody wants.
How Small Shops Can Go Digital — Economically! April 4, 2018 In the early days at CNC Software, we saw that our Mastercam CAD/CAM system was only part of a larger manufacturing solution and that an open architecture foundation could allow seamless data communication with complementary devices and systems across the shop floor.
Machine Tool Orders Start 2018 With Mixed Results March 12, 2018 Machine tool orders began 2018 with mixed results, dropping from December but posting a surge on a year-over-year basis, the Association for Manufacturing Technology (McLean, VA) said in a monthly report.
New Line of Hydraulic Chuck Extensions Targets Long-Reach Applications March 2, 2018 Celebrating its 80th year, Kennametal, the Latrobe, (PA), tooling manufacturer, says it has solved the age-long problem of tool stability when drilling in deep cavities, alongside tall shoulders, and past bulky fixtures. Reaching deep inside a workpiece to drill holes can be challenging.