Displaying 101-110 of 112 results for

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.

It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”

Machining composites presents unique challenges compared to metals. Reinforcement fibers are abrasive, shortening tool life. The plastic matrix carries away little heat, unlike metal chips, and overheating can melt the matrix.

The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.

New coatings are going the boutique route, using multiple layers and new materials to optimize for a particular application

Advanced simulation, new toolpath techniques aid programming of highly complex machinery. CAD/CAM software developers continue to refine simulation capabilities and toolpath techniques that enable programming highly complex equipment including multiaxis and multitasking machine tools.

Composites engineers are expanding their craft to build more complex, durable parts at higher production volumes. One way they are achieving this objective is by using infusion-molding processes based on Resin Transfer Molding (RTM) and Vacuum Assisted Resin Transfer Molding (VARTM).

There will be more than one new machine introduced at IMTS 2006 that will be billed as a China beater, or as an India and rest-of-Asia beater, for that matter.

Supplying the 700 level-one trauma centers in the US is an intensively competitive business. Not only must suppliers like Smith & Nephew Orthopedics Inc. (Memphis, TN) produce very fine surface finishes on implantable devices and surgical instruments made from difficult-to-machine materials, but they also must deliver quality products, as surgeons need them.

Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.