Autonomous Material Handling – The ROI and How AMRs Advance Your Operations March 4, 2021 Jeff Huerta, Senior VP for Sales at Vecna Robotics, speaks on how successful companies are advancing their operations with fully autonomous material handling equipment, and how some facilities are achieving very quick ROI. He also describes the differences between an AMR and an AGV, and addresses the topic of safety. Lastly, he prescribes ways to get started with this equipment, including what upfront costs companies should be prepared for.
The Growing Role of Automation in Finishing Operations July 15, 2020 Finishing operations have traditionally been manual, but automation and robotics are making major inroads in this key manufacturing process. In this podcast, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine talks with Normand Stoycheff, Business Development Manager for AV&R, and Giovanni Bevilacqua, Business Development Manager also with AV&R about emerging trends in automation/robotics; the main reasons allowing robotics to evolve from traditional pick-and-drop usage to more elaborate processes; how robots help the surface finishing process throughout the industry; and how surface finishing operations are developing the capability to inspect and repair.
Targeting the Skills Gap in Forming and Fabricating July 24, 2020 As in other industries, U.S. forming and fabricating companies are experiencing a critical shortage of skilled labor. In this SME Media podcast, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Robert Tessier, National Director of Advanced Fabrication Technologies for Airgas about the skills gap in the forming and fabricating industry; changes needed in the education system to fill the need for skilled labor; how automation factors into efforts to reduce the skills gap; and efforts at Airgas to develop workers for manufacturing operations, including a special program for military veterans.
Pandemic Makes Case for More Automation, Robotics September 21, 2020 Listen to this Smart Manufacturing magazine article: Pandemic makes case for more automation, robotics. Outbreak poised to prompt changes in the way manufacturers use automation.
The Three Best Practices For Implementing Machine Tending Cobots February 11, 2022 Unlike other forms of automation and what we now think of as ‘traditional’ robots, cobots are much safer for humans to interact with them. They can work side by side with humans. But this leads to new ways of thinking about automation. And there are misconceptions that persist around cobots.
The New Imperative: Improving Operations Through Industry 4.0 December 11, 2019 When it comes to being successful, manufacturers today have more tools than ever to succeed. Chris Mahar, Associate Editor of Manufacturing Engineering, talks with Jeff Lage, President, Advanced Manufacturing Technologies at Ellison Technologies, about how Industry 4.0 is helping manufacturers improve operations through data collection and insights. Providing tips on how businesses can get the most capacity out of their machines, remove waste and enable their machines do more.
Automating Aerospace Manufacturing with FANUC April 29, 2020 Aerospace is thought of as the industry with some of the most advanced technology, including automation. However, especially in automation, that may not be exactly true. In this podcast, Bruce Morey senior technical editor for Manufacturing Engineering magazine talks with Rick Schulz of FANUC America about some of the challenges and misperceptions in using automation more fully in aerospace manufacturing. Mistakes to be avoided, such as simply replacing humans with a robot, and how to use collaborative robots. The main message is that employing automation to its fullest requires a systematic approach to the entire manufacturing process.
20 women making their mark in robotics & automation February 1, 2021 Listen to this Smart Manufacturing magazine cover story: Twenty women making their mark in robotics & automation
The Gears Have It January 24, 2020 When it comes to making something move, whether it be a robot arm, machine head, assembly line or more, you need to get the power from where it is generated to where the movement happens – enter gearboxes. Mike Quaas, President of DieQua, sits down with Chris Mahar, Associate Editor, to talk about the world of automation and how gearboxes are critical to its deployment. Gearboxes have been around for hundreds or years, but today’s engineers have more choices than ever in how to utilize their power.
Going Beyond Chip Making: Saving Time November 22, 2019 Every manufacturer aims for faster, better parts. While chip making time is often the focus when it comes to time savings, Chris Mahar, Associate Editor of Manufacturing Engineering, talks with Steven Baier, Vice President of Sales for Haimer USA, about time savings that go beyond cutting time.