Continuous Insulation Resistance Testing Boosts Motor Productivity September 11, 2019 For decades, plant personnel have performed insulation resistance tests with handheld megohmmeters to prevent motor failures that lead to costly unplanned shutdowns, failure-to-produce penalties and rewinding repairs. However, these tests only provide a “snapshot” of motor health. In a matter of days, motor windings and cables exposed to moisture, chemicals, contaminants or vibration can be compromised and fail at startup.
Siemens Introduces Camstar Electronics Suite Software January 30, 2019 Siemens announced today the introduction of Camstar™ Electronics Suite software, an innovative manufacturing execution system (MES) for electronics.
Modern CNCs Make Easy Work Out of Tough Stuff June 27, 2018 It’s the machine tool acronym you never bother to put into words: CNC. And much of the time it’s probably OK to view your “computer numerical control” as a black box doing magic. But if you’re struggling with high-speed machining, need better surface finishes or higher accuracy, have training and retention problems, or want a better handle on your production efficiency, the answer just might be the latest iterations of those three little letters.
How Small Shops Can Go Digital — Economically! April 4, 2018 In the early days at CNC Software, we saw that our Mastercam CAD/CAM system was only part of a larger manufacturing solution and that an open architecture foundation could allow seamless data communication with complementary devices and systems across the shop floor.
Winds of Change Buffet Automotive Supply Chain October 21, 2016 The ongoing digital transformation of manufacturing comes baked-in with many uncertainties, and the automotive business is no exception.
Machine Components/Cleaning/Environment/Fluid Power and Other Manufacturing Equipment August 1, 2004 Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.
Bar Feeders Boost Turning Productivity March 1, 2004 One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.
When Clamps Aren’t the Answer August 1, 2008 Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.
So, You Want to Implement MTConnect? May 1, 2015 Shops today must track or measure their manufacturing operations to improve them. This need drives the growing use of MTConnect—an open, royalty-free protocol for extracting data from practically any piece of equipment, including machine tools and other manufacturing systems. The integration of MTConnect is a major undertaking, and can be a bit challenging unless certain preparations are made ahead of time.
Mastercam CAD/CAM from Tops Capstone Indy Car Engineering Project October 4, 2019 The IUPUI Mechanical Engineering Technology program concentrated on Mastercam and the online benefits of Mastercam University for its students. This approach paid big dividends on a unique Indy Car project for the Indianapolis Motor Speedway.