In this podcast, Bruce Morey, Senior Technical Editor for Manufacturing Engineering Magazine discusses collaborative robots, or cobots, with Steve Apel. He is a Regional Automation Manager for Acieta. In this role, he helps solve customer challenges through the adoption of new robotic automation technologies.
Displaying 1-10 of 22 results for
Listen to this Smart Manufacturing magazine article: Pandemic makes case for more automation, robotics. Outbreak poised to prompt changes in the way manufacturers use automation.
Finishing operations have traditionally been manual, but automation and robotics are making major inroads in this key manufacturing process. In this podcast, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine talks with Normand Stoycheff, Business Development Manager for AV&R, and Giovanni Bevilacqua, Business Development Manager also with AV&R about emerging trends in automation/robotics; the main reasons allowing robotics to evolve from traditional pick-and-drop usage to more elaborate processes; how robots help the surface finishing process throughout the industry; and how surface finishing operations are developing the capability to inspect and repair.
Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.
SME interviewed at FABTECH Greg Morehouse. He is the Executive Vice President for operations, Acieta, a leading RIA certified and FANUC Authorized System Integrator. This podcast describes how Acieta defines custom automation and how one should approach the task of engaging an integrator like Acieta in procuring an automation system, whether your shop has three people or 300.
Listen to this Smart Manufacturing magazine cover story: Twenty women making their mark in robotics & automation
Vecna Robotics’ David Clear and SVT Robotics’ TJ Fanning go into reasons manufacturers might want to consider automation and AI. They also look at how to test assumptions and scale with so many variables changing moment by moment. The adage “change is the only constant” has never been more apropos. So, it’s a great time to hear what separates a complex system from a complex adaptive system.
Catalytic CEO Sean Chou explains the difference between process automation and robotic automation, as well as what it looks like to use automation to augment existing workflows. Importantly, he describes how manufacturers can use automation to do more with less—to lessen supply chain pressures that have grown because of globalization and the Covid-19 crisis. And he details which processes manufacturers can automate to optimize resources and productivity.
Aerospace is thought of as the industry with some of the most advanced technology, including automation. However, especially in automation, that may not be exactly true. In this podcast, Bruce Morey senior technical editor for Manufacturing Engineering magazine talks with Rick Schulz of FANUC America about some of the challenges and misperceptions in using automation more fully in aerospace manufacturing. Mistakes to be avoided, such as simply replacing humans with a robot, and how to use collaborative robots. The main message is that employing automation to its fullest requires a systematic approach to the entire manufacturing process.
When it comes to being successful, manufacturers today have more tools than ever to succeed. Chris Mahar, Associate Editor of Manufacturing Engineering, talks with Jeff Lage, President, Advanced Manufacturing Technologies at Ellison Technologies, about how Industry 4.0 is helping manufacturers improve operations through data collection and insights. Providing tips on how businesses can get the most capacity out of their machines, remove waste and enable their machines do more.