IMCO Introduces M213 STREAKERS for Aggressive , High-Performance Machining of Aluminum Alloys June 10, 2021 IMCO Carbide Tool has launched a new series of endmills for extreme tool paths in aluminum alloys and provide superior surface finishes in aerospace industry applications.
Toolholding: Built for Speed May 27, 2021 The evolution to high speed machining (HSM) is continuing and toolholders are playing a crucial role in that process, which includes the interlinking of machining center, programming, high-speed spindles, advanced cutting tools, balancing, and high-performance toolholders in order for shops to take full advantage of HSM.
RAD Torque Releases B-RAD BL S Torque Wrench April 13, 2021 RAD Torque Systems has launched what it calls its most advanced battery tool, the B-RAD BL S. The new torque wrench is an addition to the battery-operated series known as the B-RAD.
Toolpath Simulation, Optimization Boosts Part Manufacturing for Fixtures February 2, 2021 Those who manufacture precision workholding systems have the same goals and challenges as the machinists who use them. Both groups strive to reduce setup times and optimize cutting cycles. Secure, consistent, and accurate gripping is paramount.
New Cutter Bodies Boost Feed Rates, Lower Cycle Times on Very Large Parts January 28, 2021 A few years ago, two companies joined forces to greatly enhance productivity in heavy milling and crankshaft machining. Their combined efforts resulted in solutions to improve throughput and reduce costs by a factor of four in some cases.
The Sharpest Tool in the Box January 21, 2021 The word “reconditioned” can ignite visions of worn, overworked products inferior to new ones. The reality is as long as you purchase from a reputable supplier, reconditioned cutting tools will deliver the same consistent results as they did upon initial purchase.
Intelligent Assembly Helps Auto Part Remanufacturer Compete March 24, 2021 When an automotive starter needs to be replaced, it’s very likely that the most expensive components—the armature, commutator or gears—are still functional, or can be restored economically.
Choose Digital, Choose the Right Drill January 11, 2021 The Industry 4.0 & Smart Manufacturing Adoption Report by IoT Analytics suggests that Industry 4.0 technology uptake is still low among manufacturers.
YG-1 Introduces i-ONE Drill Inserts and Tool Steel Holders January 15, 2021 The new i-ONE system of exchangeable micrograin carbide drill inserts and premium tool steel holders with coolant channels is based on coating advances and optimized designs for higher tool life and changeover speed, according to tool manufacturer YG-1.
GWS Tool Group Acquires Taurus Tool & Engineering January 12, 2021 GWS Tool Group has acquired Taurus Tool & Engineering. Taurus, based in Batavia, Illinois. It is the first acquisition in 2021 for GWS Tool Group, following three previous acquisitions in 2020.