Advanced Cutting Tools Rev Up Milling Operations November 5, 2018 Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.
When it Comes to Simulation Software, Seeing is Believing October 25, 2018 In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.
From Multispot Welding to Limiting Soot: Tips for Optimal Laser Joins September 28, 2018 In our May webinar titled “Lasers in Manufacturing: State of the Art in 2018,” we noted the emergence of some novel technologies to produce the “holy grail” of laser welding: spatter-free joins with no porosity and, when required, highly aesthetic outcomes.
Hot Techniques for Cutting High-Temperature Alloys August 1, 2018 For Dale Mickelson, Yasda product manager at Methods Machine Tools Inc. (Sudbury, MA) and author of several books on hard milling, tackling heat-resistant superalloys (HRSAs) requires the perfect combination of machine, workholding, tooling, tool paths and coolant.
Medical Machining Shifts Into High Gear—With a Laser Assist July 5, 2018 Constant refinement of medical machining from tooling design to finished product requires not only the ability to handle a broad range of plastic and metal materials but also to achieve predictable results—particularly in the face of strict regulations.
Workholding Solutions to Reduce Costs, Increase Throughput April 24, 2018 At the Nirvana Machine Shop on planet Perfection, every workpiece is clamped to a custom-built fixture mounted on a dedicated machine tool. Each workpiece is dimensionally identical to the one before and the one after. All the fixtures are totally automatic—instantly positioning, clamping, machining, inspecting, and releasing the part with the ultimate precision.
North Dakota State University Engineering Team Wins 3M’s Disruptive Design Challenge April 19, 2018 Four universities—Iowa State University, University of Minnesota, University of Wisconsin-Madison and North Dakota State University (NDSU)—competed in the inaugural 3M Industrial Adhesives and Tapes Disruptive Design Challenge (DDC) at 3M’s headquarters (St. Paul, MN), Friday, April 13.
Cutting Strategies for Airframe Components March 5, 2018 Machining aerospace materials is a challenging task. Not only are machining operations tightly controlled, a wide variety of workpiece materials are employed, including aluminum, titanium, and carbon-fiber reinforced plastics (CFRPs). The following is a brief guide to cutting tool options for successful machining of airframe components. All of the tools referenced are manufactured by Mitsubishi Materials.
New Line of Hydraulic Chuck Extensions Targets Long-Reach Applications March 2, 2018 Celebrating its 80th year, Kennametal, the Latrobe, (PA), tooling manufacturer, says it has solved the age-long problem of tool stability when drilling in deep cavities, alongside tall shoulders, and past bulky fixtures. Reaching deep inside a workpiece to drill holes can be challenging.
The Quest for Safer 3D Printing Materials October 18, 2017 When Desktop Metal introduced its “office-friendly” Studio metal prototype printer earlier this year, the company renewed attention on the issue of safer materials for binder jetting, an additive manufacturing method.