Auto Industry Faces Short- and Long-Term Challenges December 6, 2016 Sales of cars and light trucks plummeted during the Great Recession and General Motors Co. and Chrysler emerged from government-back bankruptcies in 2009. Since then, total industry deliveries have surged, hitting a record 17.47 million in 2015, according to Autodata Corp.
The Wide World of Deburring and Refinishing October 5, 2016 Burrs, sharp edges, and rough surfaces plague even the most precise metal-cutting or forming process. Deburring and finishing can often be treated as the step-child of a manufacturing process, but its importance is growing as tolerances get tighter and precision devices become the norm.
Creating New Value at Toyota February 25, 2016 I traveled to Toyota headquarters in Japan with Jeff Liker for a research project. We wanted to learn more about the engineering and collaboration that created the Toyota New Global Architecture (TNGA), the strategy and innovation behind hydrogen vehicles, and how they had adapted and improved their development system to meet the increasing demands of the ultra-competitive global auto industry.
Quality Inspection and the CAD Connection January 6, 2016 Modern manufacturing is rapidly adopting model-based definition (MBD). When employing an MBD strategy, the CAD model becomes more than the nominal to which all parts are measured and inspected against. MBD keeps the all-important digital thread intact—from design to manufacturing to inspection and quality reporting.
Change-up Pitch: From Metal to Plastic October 2, 2014 Even though it’s been around since the 1950s, when engineering-grade resins were first introduced, many manufacturers still are not familiar with the many benefits that metal-to-plastic conversion provides.
Grinding Roots August 22, 2013 Until the middle of 2010, first-tier subcontract machinist, JJ Churchill, could produce turbine blades only if they had their fir-tree root-forms preground elsewhere, or if they were subsequently added by another subcontractor. No longer is this the case.
Measure It On The Machine January 1, 2013 Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.
The Ins and Outs of In-Line Automated Inspection July 1, 2012 The challenges to manufacturing as it evolves into the 21st century are now familiar, and impact how metrology must contribute. Manufacturers face uncertain production volumes with roller-coaster demand, shorter production runs and faster product development cycles. Automation, while alluring as a way to reduce cost, needs to adjust.
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
Lean at NUMMI September 1, 2005 To remain competitive in the fiercely contested North American automotive industry, the New United Motor Manufacturing Inc. (NUMMI, Fremont, CA) assembly plant, a joint venture between Toyota Motor Corp. (Aichi Prefecture, Japan) and General Motors Corp. (Detroit), has rededicated its efforts in lean manufacturing during the past few years by applying key tenets of the Toyota Production System (TPS).
