Displaying 1-10 of 41 results for

Dau Thermal Solutions Inc. (Macedon, NY) was finding that its spindle speeder was definitely not up to speed when it came up against the test results for NSK’s HES510 series electric spindle.

The use of electrical discharge machining, or EDM, is spreading as manufacturers need more precisely cut workpieces, often made from tough to machine materials.

VMCs have had a productive past, present and the future looks promising

“Metrology and its relationship to manufacturing is rapidly evolving,” Ken Woodbine, president, Wilcox Associates, a brand of Hexagon Metrology (North Kingstown, RI), recently observed. “We are seeing larger quantities and faster speeds of measurement data collection. The next challenge is what to do with all that data.”

Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.

Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.

Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.

It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.

One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.