April 2020 U.S. Cutting Tool Orders Down 14.4% from April 2019 June 16, 2020 April 2020 U.S. cutting tool consumption totaled $142.9 million, according to the U.S. Cutting Tool Institute (USCTI) and AMT – The Association For Manufacturing Technology.
Seco Tools Acquires Cutting Tool Division of QCT in Mexico June 2, 2020 Seco has completed the acquisition of the cutting tool division of Quimmco Centro Tecnológico (QCT), a subsidiary of the Quimmco Group. The cutting tool division acquired from QCT has three locations in Mexico to support customers and is a leading solid-carbide tooling manufacturer, specializing in custom products and reconditioning.
Gear Machining Made Easy: TNC Cycles for Skiving February 24, 2020 Machining gears is still regarded by many machine tool operators as a true challenge and a realm reserved exclusively for specialists.
Innovations in Workholding April 14, 2020 Not long ago, the mention of workholding might call to mind the traditional vise or three-jaw chuck. The integral nature of proper fixturing to successful machining has forever changed that paradigm and made workholding as critical to the manufacturing process as any of the machines or systems of which it is a part.
Boring Tools Get Smart, Go Deep February 3, 2020 It’s said that holemaking is the most commonly performed of all machining operations. And it stands to reason that most of those holes must be reamed or most likely bored after drilling. For as long as machinists have been boring holes, however, they’ve struggled with a variety of problems.
New YG-1 Fiberglass Routers Designed to Machine Composites Better, Faster March 4, 2020 YG-1 has launched four new solid-carbide fiberglass routers for CNC or hand routers to handle machining processes for fiberglass and other high-performance fibers. The new routers are optimized in composition, cutting angles, flute strength and stability for longer life and lower cost per part, according to the company.
Intelligent Toolholder Controls Cutting in Real Time April 15, 2020 Vibrations, chatter marks, and tool failure are all problems that can be prevented with intelligent monitoring and feedback systems.
BLM GROUP Enhances Automatic Laser Cutting Systems April 21, 2020 New capability adapts process parameters for optimal results independent of operator experience for its LT Fiber EVO and CO2-type LT722D.
September 2020 U.S. Cutting Tool Orders Up 14.7% from August 2020 November 17, 2020 September 2020 U.S. cutting tool consumption totaled $156.1 million, according to the U.S. Cutting Tool Institute (USCTI) and AMT – The Association For Manufacturing Technology.
GWS Tool Group Acquires STF Precision October 26, 2020 GWS Tool Group acquiring STF Precision marks GWS’ third add-on acquisition in 2020.