Tooling It Up for Composites April 1, 2010 From Boeing 787s to new Navy destroyers, fiber-reinforced composites are gaining in use. As production scales up, more-efficient manufacturing remains a focus. One key to that efficiency is tooling for composites. These molds and forms give the final shape to a part, and are often integral to their final curing.
Edge Finishing — Product Enhancement or Wasted Cost? June 1, 2009 Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.
When Clamps Aren’t the Answer August 1, 2008 Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.
Ceratizit Wins Innovation Award for the Additive Manufacturing of Carbide Parts December 18, 2020 The Ceratizit Group has won the 2020 Innovation Award of the FEDIL business federation in the ‘Process’ category for the development of a new process for the additive manufacturing of tungsten carbide-cobalt.
Shrink-Fit Technology Enhances Shop’s ROI November 25, 2020 Raym-Co Inc., located in Farmington, Conn., is a job shop with a 37,000 ft2 (3,065 m2) facility and approximately 60 CNC machines.
Nikon Metrology Launches Next-Generation Laser Radar Inspection System October 29, 2020 The measuring and inspection arm of Japanese camera giant Nikon, Nikon Metrology, debuts APDIS, a Laser Radar inspection system the company claims is up to 10 times faster than conventional measurement tools, saving production lines time and money.
EMO 2021 Scheduled for October 2021 in Milan, Italy September 24, 2020 Betting that the worst of the pandemic will be over and travel restrictions lifted, the 2021 edition the machine tool exhibition is putting out the welcome mat to the world.
Kennametal Introduces Flat Bottom Geometry for KenTIP FS September 9, 2020 New replaceable drill tip saves tooling costs and eliminates process steps
Machine Tool Processes Depend on Creative Enablers July 30, 2020 It is fair to say that IMTS, virtual or otherwise, presents the ultimate manufacturing tool box, where shops can find the newest, most innovative and proven devices for holding, moving, cutting, bending and inspecting workpieces.
Practical Holemaking Automation In CAM Software May 26, 2020 Holemaking. A layperson might think, “what could be simpler?” But a machinist knows better because there’s a lot to consider when creating a streamlined toolpath.