Big, Heavy, Awkward Parts Need Workholding, Too April 23, 2018 If you’ve ever seen industrial wind turbine components on the back of a flatbed truck rolling down the highway, you have a good idea of what a large, heavy, difficult-to-handle workpiece is. For example, with a single blade on the GE 1.5 mW turbine being almost as long as a football field, the entire blade assembly weighs about the same as 36 small cars.
The Basics of Live Tooling April 27, 2018 Live Tooling, as the name implies, is specifically driven by the CNC control and the turret of various spindle and powered sub-spindle configurations on CNC lathes to perform various operations while the workpiece remains in orientation to the main spindle.
Advances in Titanium Machining—Do More on Less Floor February 6, 2017 The demand for titanium components by the aerospace industry began as a whisper about 15 years ago and steadily grew to a sustained, raucous shout over the last five and likely won’t quiet for several more.
Tooling and Workholding Systems August 1, 2002 “We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Maybe it’s Time to Try Some ‘Swiss Cheese’ November 1, 2016 These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Interpreting the Language of GD&T in Metrology September 1, 2014 The industrial world is continuing its adoption of Geometric Dimensioning and Tolerancing (GD&T), the advanced tolerancing methodology. The symbolic language is intended to be both more precise while providing more latitude in allowable variations, replacing the simpler method of adding tolerances to each dimension.
Picking the Right Toolholder for the Toughest Jobs August 1, 2015 When sizing up an application for a milling toolholder, it is necessary to consider the materials being machined, how aggressively metal is going to be removed, and any machining conditions that are likely to present a challenge to tooling security. By now, the pros and cons of hydraulic, mechanical, and heat-assisted shrink-fit systems are well known and results well documented.
Advances in Hand-Held Metrology August 1, 2015 While high-end metrology devices like advanced laser scanners or precision CMMs garner a lot of attention, it is hard to imagine any industrial setting without the presence of work-a-day hand-held, contact metrology tools such as calipers or micrometers. That is what Justin Frazzini, quality manager for A.A. Jansson (Waterford, MI), retailer and calibration and repair service provider, observes in his practice.
