Displaying 21-30 of 118 results for

You don’t have to look too far to find tooling presetters that fit the machining requirements of just about any size shop. The value of off-line tool presetting—rather than stopping machine spindles to touch off tools as machines sit idle—continues to prove itself invaluable, especially to the smallest first-time user shops.

A 1965 Shelby Cobra 427 shown at the Detroit Auto Show was additively manufactured on a Cincinnati BAAMCI machine by DOE’s Oak Ridge National Laboratory (ORNL), one of seven founding members of the Institute for Advanced Composites Manufacturing Innovation. The Detroit IACMI branch will get $70 million to develop a robust supply chain to improve materials, handling, and machining properties for automotive composites.

Don’t overlook advanced technology available for removing the gnarliest burrs from parts large or small

From Boeing 787s to new Navy destroyers, fiber-reinforced composites are gaining in use. As production scales up, more-efficient manufacturing remains a focus. One key to that efficiency is tooling for composites. These molds and forms give the final shape to a part, and are often integral to their final curing.

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.

Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.

Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.

There is no real problem with threading a pipe. Most DIY types can do it in their workshop with hand tools, but when the pipe is 40′ long and ordered by the ton, you are in oil country. Pumping crude oil out of the ground requires drill pipe, casing, tool joints, tees, crosses, flanges, and couplings. All those items need to be machined. And that takes specialized workholding.

Industry 4.0 is often referred to as smart manufacturing, where technology enables interconnectivity for machines and manufacturing software and systems. It also provides “Big Data,” increased visibility and remote access to manufacturing assets.

Makers of machine tools used to produce gears are looking to the 2018 edition of IMTS to demonstrate how they’re meeting customer demands.