Displaying 51-60 of 64 results for

Metrology for medical devices needs to become more capable as those devices get more varied and complex. Manufacturers must inspect dental implants, coronary stents, orthopedic joints, and implanted electronic devices. Surgeons are increasingly using intricate, sometimes one-off, surgical tools. There is also a growing number of consumable items, such as hypodermic needles, made on rapid production lines. They all need ever more precise quality control.

Batch and queue is the hallmark of a mass production system. Parts are processed, moved in large quantities to the next process, wait for their turn, are processed, and moved as a batch to the next process.

Here’s something you can cut out and hang on your bulletin board if you run a manufacturing company, large or small. I’ve spent nearly 60 years thinking about the factory floor, and here’s how I believe it should be run.

Materials science has opened new possibilities for designers of cars, planes and other products. Metal alloys are now as precisely engineered as they are machined. The result is longer lasting, stronger parts. But with a wider selection of materials comes risk—how can you be sure that one piece of gray metal stock is different than another? Careful warehousing procedures and paperwork only go so far.

Workers in the oil and gas industry continue to be one of the groups at the highest risk of injuries and fatalities on the job compared to all other U.S. industries. The most recent data from the Bureau of Labor Statistics (2015) revealed that out of 120 workplace deaths in the mining, oil, and gas extraction industry, 74 of them occurred within the support activities for oil and gas operations.

It’s easy to become dazed by the continuing stream of buzz words. For those of us in manufacturing, all this buzz creates a sense of impending change, but no clarity on what that change might be. Uncertainty means anxiety.

Bill Ford, executive chairman of Ford Motor Co., is now in Act III in his career at the automaker. The outcome will determine Ford Motor’s future and his legacy.

Secure, accurate workholding sets the stage for consistent machining productivity. Depending on the parts and processes involved, workholding can be as simple and temporary as a plain vise or clamp or as complex and permanent as a machined and fabricated fixture that is custom-designed to hold a unique part.

Process improvement encompasses a wide range of tools, techniques and strategies. When properly deployed, shop-floor data collection and monitoring systems can help factory-floor managers leverage key data metrics including overall equipment effectiveness (OEE) and total effective equipment performance (TEEP) that measure machine uptime and pinpoint bottlenecks or other problems in order to improve machining performance.

Not all threaded connections serve similar purposes.The load-carrying needs of an aerospace engine support bolt in a tension assembly greatly exceed those of a simple screw that fastens a cover plate to an electrical wall socket. International thread-acceptance documents and standards recognize this basic engineering fact, and incorporate different thread-inspection requirements into their verification standards.