Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Programming CMMs May 1, 2004 Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.
Metrology Tools for Medical: A New Focus on Vision Systems November 6, 2017 Metrology for medical devices needs to become more capable as those devices get more varied and complex. Manufacturers must inspect dental implants, coronary stents, orthopedic joints, and implanted electronic devices. Surgeons are increasingly using intricate, sometimes one-off, surgical tools. There is also a growing number of consumable items, such as hypodermic needles, made on rapid production lines. They all need ever more precise quality control.
Pilot Composites Workshop Wows Students February 7, 2017 Carbon fiber is a magical material. That or similar comments were heard over and over from Roosevelt High School (Seattle) students attending a Composites 101 Workshop held at the National Resource Center for Materials Technology Education (MatEdU), a National Science Foundation Advanced Technological Education (ATE)-sponsored program at Edmonds Community College (Lynnwood, WA).
New Uses of Noncontact Metrology in Aerospace February 6, 2017 Aircraft manufacturers are finding noncontact metrology ever more useful. Its inherent high throughput and decreasing cost is complementing the industry’s ramp-up to meet the world’s appetite for more airplanes.
Conductive Thermoplastics for 3D Printing February 9, 2017 As inventive and imaginative as 3D printer technology is, so are the materials that R&D labs have come up with to build parts, including conductive thermoplastics.
3D Laser Gaging Ensures Flawless Engine Fasteners January 6, 2017 In an automobile engine, seven types of screws out of approximately 70 are considered critical to achieving the engine’s specified design performance, despite high vibration and heat. The seven include bolts for the cylinder head, crankshaft, con rod, flywheel, and main bearing cap, as well as for the camshaft cap, camshaft sprocket and VCT.
Smashing Silver Microcubes Toughens Up Materials January 4, 2017 Scientists at Rice University (Houston) are smashing tiny silver cubes into a hard target in order to make these metallic microcubes ultrastrong and tough by rearranging their nanostructures upon impact.
Companies Push the Boundaries of 3D Printing Composites October 26, 2016 Entrepreneurs and existing manufacturers are making 3D printers that automate production of composite parts, and are unique in their design.
