Automatic Cutting-Edge Measurement in Tool Production August 22, 2016 Tool life, geometry, and stability largely depend on proper edge preparation. Tool Flo, located in Houston, Texas, is a manufacturer of carbide cutting tools such as inserts for threading, turning, and milling. The company uses Alicona’s optical 3D measurement systems in the quality assurance of inserts.
Grinding the Hard Stuff August 1, 2007 Expanding use of ever-harder materials has opened the door to wider use of grinding processes on materials such as titanium, ceramics, and superalloys.
Automating the Grinding Process June 1, 2013 Whether the process is cylindrical or profile grinding, automation, which can increase cycle time, throughput, consistency of part quality and taking real-time in-process measurements, is once again in demand. The reasons can be found in the benefits found in typical applications and the innovative and effective forms of automation available from machine builders like United Grinding Technologies Inc. (UGT; Miamisburg, OH), and their automation integrator of choice, Matrix Design Inc. (Elgin, IL).
DIY: Creating Through-Tool Coolant Capability June 1, 2015 New retrofit systems make it possible to quickly, easily and cost effectively transform the standard external-coolant live tooling heads on turning machine turrets into those with through-tool-coolant capability. And shops that have done the retrofit are experiencing longer tool life, more efficient chip control and less heat generation.
US Cutting Tool 2017 YTD Consumption up 8.0 % in October December 13, 2017 October US cutting tool consumption totaled $198.00 million according to the U.S. Cutting Tool Institute (USCTI) and AMT – The Association For Manufacturing Technology. This total, as reported by companies participating in the Cutting Tool Market Report (CTMR) collaboration, was up 13.2 percent from September’s $174.92 million and up 17.2% when compared with the $169.00 million reported for October 2016. With a year-to-date total of $1.835 billion, 2017 is up 8.0% when compared with 2016.
Lifting Devices Reduce Incubator Assembly Labor June 15, 2016 Thermo Fisher Scientific, a leading manufacturer of laboratory technology, designed new incubators to cultivate human and animal cells. With 55,000 employees worldwide and group sales of $17 billion, Thermo Fisher Scientific is one of the world’s largest providers of laboratory and analysis technology. The company headquarters are located in Waltham, MA, near Boston.
HVOF Coating Puts Grinding Machines to the Test August 2, 2016 Manufacturers continually seek ways to make their products stronger and last longer. High Velocity Oxygen Fuel (HVOF) spray coatings help achieve those goals. However, grinding the coatings can be a challenge.
2016 Was a Good Year for Lasers; 2017 Looks Even Better June 21, 2017 Strong 2016 earnings among top industrial laser providers, continued brisk adoption of fiber lasers, cheaper ultrafast lasers, and a host of novel applications and notable corporate acquisitions signal a big year ahead for photonics-based manufacturing.
Keeping Old Planes in the Air with Laser Scanning June 21, 2017 Your father’s Oldsmobile may be long gone but his B-52 is still pulling missions, and they haven’t built the “BUFF” (Big Ugly Fat Fellow) since 1962. The last KC-135 tanker was built in 1965. Besides aging warbirds (the average plane in the US Air Force is over 28 years old) there are hundreds of ancient civilian airliners carrying friendlier payloads everyday. The key to doing this safely is of course excellent maintenance and periodic upgrades. Laser scanning plays an essential role.
Sandvik Coromant Supports Vocational Training through WorldSkills September 18, 2017 Cutting tool and tooling system specialist Sandvik Coromant (Sandviken, Sweden and Fair Lawn, NJ) is the official sponsor and exclusive tooling partner for seven skills competitions at WorldSkills Abu Dhabi, to be held in October 2017.