Automating the Grinding Process June 1, 2013 Whether the process is cylindrical or profile grinding, automation, which can increase cycle time, throughput, consistency of part quality and taking real-time in-process measurements, is once again in demand. The reasons can be found in the benefits found in typical applications and the innovative and effective forms of automation available from machine builders like United Grinding Technologies Inc. (UGT; Miamisburg, OH), and their automation integrator of choice, Matrix Design Inc. (Elgin, IL).
Grinding the Hard Stuff August 1, 2007 Expanding use of ever-harder materials has opened the door to wider use of grinding processes on materials such as titanium, ceramics, and superalloys.
Sandvik Coromant Supports Vocational Training through WorldSkills September 18, 2017 Cutting tool and tooling system specialist Sandvik Coromant (Sandviken, Sweden and Fair Lawn, NJ) is the official sponsor and exclusive tooling partner for seven skills competitions at WorldSkills Abu Dhabi, to be held in October 2017.
Advances in Titanium Machining—Do More on Less Floor February 6, 2017 The demand for titanium components by the aerospace industry began as a whisper about 15 years ago and steadily grew to a sustained, raucous shout over the last five and likely won’t quiet for several more.
Maybe it’s Time to Try Some ‘Swiss Cheese’ November 1, 2016 These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
What’s the Connection? June 1, 2004 A lot of attention is paid to the “business end” of CNC toolholders–the part that actually holds the tool.
Tooling and Workholding Systems August 1, 2002 “We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Picking the Right Toolholder for the Toughest Jobs August 1, 2015 When sizing up an application for a milling toolholder, it is necessary to consider the materials being machined, how aggressively metal is going to be removed, and any machining conditions that are likely to present a challenge to tooling security. By now, the pros and cons of hydraulic, mechanical, and heat-assisted shrink-fit systems are well known and results well documented.