Micro Manufacturing Keeps Shrinking the Envelope January 1, 2013 Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.
Electropolishing Automation April 1, 2012 Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
Drill/Tap Centers Take to Milling August 1, 2009 It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.
Mix and Match for Lightweight Autos September 1, 2014 It is common sense—a vehicle that weighs less requires less fuel to move it. A number of studies show that reducing the mass of a vehicle by 10% results in anywhere from 4.5 to 6% better fuel economy—well worth the effort.
Bar Feeders Boost Turning Productivity March 1, 2004 One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.
Tooling It Up for Composites April 1, 2010 From Boeing 787s to new Navy destroyers, fiber-reinforced composites are gaining in use. As production scales up, more-efficient manufacturing remains a focus. One key to that efficiency is tooling for composites. These molds and forms give the final shape to a part, and are often integral to their final curing.
Edge Finishing — Product Enhancement or Wasted Cost? June 1, 2009 Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.
Machining with Robots November 1, 2009 Robotic machining technology has advanced to where it poses a serious alternative to metalcutting applications on more traditional machining centers. With the latest robotics equipment and related software, automation suppliers and robotic system integrators are gaining some traction using robots in many material-removal applications previously done only with machine tools.
Machine Components/Cleaning/Environment/Fluid Power and Other Manufacturing Equipment August 1, 2004 Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.