Masters of Manufacturing: Joseph M. Juran July 1, 2005 Considered by many to be the “Father of Quality Management,” Dr. Joseph M. Juran is recognized as the man who added a human dimension to quality, expanding it from its statistical origins to a broader management science.
How A Vendor Managed Inventory System (VMI) Benefits Business April 12, 2016 When a manufacturer has excess inventory not adding value to the process, the inventory is hurting the company’s balance sheet, and is by definition wasteful.
Tooling and Workholding Systems August 1, 2002 “We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Maybe it’s Time to Try Some ‘Swiss Cheese’ November 1, 2016 These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Interpreting the Language of GD&T in Metrology September 1, 2014 The industrial world is continuing its adoption of Geometric Dimensioning and Tolerancing (GD&T), the advanced tolerancing methodology. The symbolic language is intended to be both more precise while providing more latitude in allowable variations, replacing the simpler method of adding tolerances to each dimension.
Geometry Lesson Teaches Corvette How to Lighten Up October 14, 2016 It’s been almost two decades since the C5 Corvette hit the streets with its groundbreaking chassis built around hydroformed steel bumper-to-bumper frame rails. The technology gave engineers a chance to create components that were both lighter and stiffer than traditional stamped and welded assemblies.
Faurecia Goes All In on Industry 4.0 October 18, 2016 Automotive supplier Faurecia (Nanterre, France) decided it needed to get serious about Industry 4.0 fast.
Extrusion and Drawing Knowledge January 2, 2015 Extrusion and drawing, two related, stalwart topics in material forming, are covered from top of punch to bottom of die in more than 200 papers in the SME Technical Paper library. The range of contributors is broad, from companies like Alcoa, Westinghouse, ASEA, Western Electric and General Electric to universities in Japan, Germany and the US, as well as individual entrepreneur metalworking shops.