Faucet Parts Gush from Multistation Center November 1, 2013 A manufacturing engineer’s open mind, common sense and eclectic background in business have transformed the way parts are machined at the Guadalajara, Mexico, plant of plumbing fixture leader URREA Group.
Masters of Manufacturing: Joseph M. Juran July 1, 2005 Considered by many to be the “Father of Quality Management,” Dr. Joseph M. Juran is recognized as the man who added a human dimension to quality, expanding it from its statistical origins to a broader management science.
Tooling and Workholding Systems August 1, 2002 “We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Maybe it’s Time to Try Some ‘Swiss Cheese’ November 1, 2016 These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Interpreting the Language of GD&T in Metrology September 1, 2014 The industrial world is continuing its adoption of Geometric Dimensioning and Tolerancing (GD&T), the advanced tolerancing methodology. The symbolic language is intended to be both more precise while providing more latitude in allowable variations, replacing the simpler method of adding tolerances to each dimension.
Picking the Right Toolholder for the Toughest Jobs August 1, 2015 When sizing up an application for a milling toolholder, it is necessary to consider the materials being machined, how aggressively metal is going to be removed, and any machining conditions that are likely to present a challenge to tooling security. By now, the pros and cons of hydraulic, mechanical, and heat-assisted shrink-fit systems are well known and results well documented.
Advances in Hand-Held Metrology August 1, 2015 While high-end metrology devices like advanced laser scanners or precision CMMs garner a lot of attention, it is hard to imagine any industrial setting without the presence of work-a-day hand-held, contact metrology tools such as calipers or micrometers. That is what Justin Frazzini, quality manager for A.A. Jansson (Waterford, MI), retailer and calibration and repair service provider, observes in his practice.
Programming CMMs May 1, 2004 Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.