Machining with Robots November 1, 2009 Robotic machining technology has advanced to where it poses a serious alternative to metalcutting applications on more traditional machining centers. With the latest robotics equipment and related software, automation suppliers and robotic system integrators are gaining some traction using robots in many material-removal applications previously done only with machine tools.
Edge Finishing — Product Enhancement or Wasted Cost? June 1, 2009 Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.
When Clamps Aren’t the Answer August 1, 2008 Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.
Machine Components/Cleaning/Environment/Fluid Power and Other Manufacturing Equipment August 1, 2004 Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.
Bar Feeders Boost Turning Productivity March 1, 2004 One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.
Chrysler Implements Flexible Manufacturing June 6, 2016 Challenged by an increasingly niche-oriented automotive market, The Chrysler Group (Auburn Hills, MI) must increase the number of models it offers while decreasing its capital investment. The company plans to offer 50% more models in 2009 compared to 2004, according to John Felice, VP of manufacturing, technology and global enterprise for Chrysler.
Laser Takes Heat Out of Tough Tool Grinding December 1, 2016 Cutting tool maker Shape-Master Tool Co. (Kirkland, IL) needed to expand its tool grinding capability beyond that of its conventional machines or run the risk of losing work to the competition.
Oilfield Shop Gets into Small Parts Watchmaking December 1, 2016 When work in the oil field dried up due to poor economic conditions, Knust-Godwin LLC, a Texas oil & gas supplier, faced new challenges following transitioning into small parts machining. Rather than hunker down and wait out the cyclical downturn as many shops would do, David Prickett, sales manager, and Knust-Godwin management agreed they should work to diversify the company’s customer base.
With Machine Monitoring, Instant ROI is Possible August 18, 2016 There have been many process improvement trends in manufacturing over the decades, and none have had more significant ROI than machine monitoring. The increase in machine monitoring is owed in large part to the rise in popularity of the open and royalty-free interconnectivity standard MTConnect.
Lasers Grow Manufacturing June 1, 2015 Today, laser technology in manufacturing touches all of our lives on a daily basis; lasers cut air bag material and weld air bag detonators for our in-car safety; lasers weld the batteries in many of our mobile devices; lasers drill aero-engine components for planes; lasers cut the glass for our smart phones and tablets screens; lasers weld the drivetrains in our cars and trucks; lasers cut medical stents that increase and enhance our lives, just to name a few.
