Electropolishing Automation April 1, 2012 Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
Computer-Aided Fixture Design: An Update April 1, 2010 All fixtures are designed to hold a workpiece in position firmly and accurately during a manufacturing process.
Tooling and Workholding August 1, 2006 Overall, there are two overriding customer needs: reducing cycle time and machine downtime. They want higher feed rates and depth of cut for greater metal removal.
Lean at NUMMI September 1, 2005 To remain competitive in the fiercely contested North American automotive industry, the New United Motor Manufacturing Inc. (NUMMI, Fremont, CA) assembly plant, a joint venture between Toyota Motor Corp. (Aichi Prefecture, Japan) and General Motors Corp. (Detroit), has rededicated its efforts in lean manufacturing during the past few years by applying key tenets of the Toyota Production System (TPS).
So, You Want to Implement MTConnect? May 1, 2015 Shops today must track or measure their manufacturing operations to improve them. This need drives the growing use of MTConnect—an open, royalty-free protocol for extracting data from practically any piece of equipment, including machine tools and other manufacturing systems. The integration of MTConnect is a major undertaking, and can be a bit challenging unless certain preparations are made ahead of time.
The Increasingly Perfected Science of Machining Composites April 1, 2015 A 1965 Shelby Cobra 427 shown at the Detroit Auto Show was additively manufactured on a Cincinnati BAAMCI machine by DOE’s Oak Ridge National Laboratory (ORNL), one of seven founding members of the Institute for Advanced Composites Manufacturing Innovation. The Detroit IACMI branch will get $70 million to develop a robust supply chain to improve materials, handling, and machining properties for automotive composites.
Innovative Tools Remove the Jagged Edges October 1, 2014 Don’t overlook advanced technology available for removing the gnarliest burrs from parts large or small
Mix and Match for Lightweight Autos September 1, 2014 It is common sense—a vehicle that weighs less requires less fuel to move it. A number of studies show that reducing the mass of a vehicle by 10% results in anywhere from 4.5 to 6% better fuel economy—well worth the effort.
Big CNC Machine Gives Shop An Aerospace Lift March 1, 2011 When a contract manufacturer sees an opportunity in the competitive aerospace market, it sets priorities aimed at providing the right combination of processes required to meet the industry’s exacting demands. Precision machining and finishing, parts inspection, and, of course, certifications from OEMs and industry alliances are at the top of the list. Increasingly, aerospace suppliers like Volvo Aero Connecticut (Newington, CT) are benefiting from five-axis machining, advanced CNC controls, motors and drives, robotic deburring, and on-machine inspection for a competitive advantage.
